Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba NJ-35D65 series delivers full extension and integrated soft-close in a 24 inch side-mount ball-bearing slide rated at 100 lb per pair. Built for cabinet shops and contractors specifying drawers in deeper runs where both full rear access and controlled closing are required, this slide handles the load class squarely and settles every drawer shut without a slam.
At 24 inches, this slide is sized for deeper-than-average cabinet runs: base cabinets with 24 inch drawer boxes, pantry-adjacent utility drawers, bathroom vanity drawers in deeper furniture-style cases, and workshop cabinets where tools and supplies need to come fully out of the box. Full extension is the spec that matters here. The entire drawer travels clear of the cabinet face, so the back of the box is as reachable as the front. For drawers under countertop overhangs or inside deep face frames, full extension makes a practical difference every time the drawer is opened.
The 100 lb per pair rating covers everyday residential and light commercial loads comfortably. A fully stocked kitchen drawer of pots, pans, or pantry goods typically runs well under that threshold, and the rating leaves headroom for the occasional overloaded drawer that a real kitchen or shop produces.
Steel members carry the load; the zinc finish provides reliable indoor corrosion resistance without adding visual weight to the cabinet interior. The bearing system runs on steel ball bearings in full-length raceways, keeping movement smooth and consistent from the first pull to the ten-thousandth. The soft-close mechanism is integrated into the slide, not a retrofit clip or add-on damper. It engages in the last portion of travel, decelerating the drawer and settling it closed with no slam and no secondary noise. That behavior holds whether the drawer is nearly empty or loaded near its rated capacity.
Cabinet shops running production kitchens and bath vanities reach for the 10-pair box format because it matches the pace of a multi-drawer job without individual packaging to manage. Contractors sourcing hardware for a renovation with deeper-than-standard base cabinets get the 24 inch length that matches the drawer box depth directly. Designers specifying soft-close on every drawer in a build can use these slides across kitchen, bath, and utility rooms in the same order without switching series. The non-handed design means no orientation errors at the bench, which matters when a shop is pulling pairs out of a box and installing back to back.
Per pair — that is the standard basis for drawer slide load ratings. One pair of slides supports up to 100 lb of drawer and contents.
Standard side-mount ball-bearing slides require 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to leave the correct gap for both slides.
The box contains 10 complete pairs — each pair is two slides, a cabinet member and a drawer member, ready to install on one drawer.
They install in face-frame cabinets, but the back end of the slide needs rear support. Add rear mounting brackets appropriate for side-mount slides in face-frame construction; those brackets are sold separately.
The zinc finish on steel is suited to dry indoor service. For high-humidity spaces like outdoor kitchens or wet utility rooms, specify a stainless steel slide instead.
A 24 inch full-extension soft-close slide in a production box format — the right combination of depth, access, and closing behavior for shops and contractors who need every drawer to perform the same way, job after job.
Sold In: 10 Pair