Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
STBAR224-SS bar pull is a Pro Value Series steel handle designed for cabinet and furniture applications where a clean bar style is preferred. The pull uses a 224 mm (8-13/16 inch) center to center dimension, which sets consistent hole spacing across doors and drawers for easier layout on multi-opening runs. The overall 12 inch length creates a long gripping area, which helps when operating wider drawers or tall doors with one hand. The stainless steel finish over steel provides a neutral, project-friendly look that matches common stainless appliances and hinges in many shops. The 1-5/16 inch projection sets the pull off the face enough for fingers to clear the door, which supports comfortable use on thicker fronts. A 1/2 inch width gives the bar a slimmer profile, which works well where hardware needs to look proportional on modern, flat-panel fronts. The 8-32 x 1 inch screw size supports a common threading standard for cabinet fronts drilled for machine screws.
The 224 mm (8-13/16 inch) center to center dimension on this Pro Value Series steel pull defines the drilling distance between mounting holes, which guides jig setup when laying out repetitive cabinet runs. With a 12 inch overall length, the pull extends beyond the hole spacing, so installers can align the bar visually with rail edges or drawer fronts while relying on the fixed screw centers for structure. The 1-5/16 inch projection establishes the standoff from the cabinet face, which affects how far the bar sits from doors and drawer fronts in tight galley runs or near adjacent walls. A 1/2 inch wide bar creates a narrower footprint against the wood, supporting layouts where multiple pulls sit close together on banks of drawers. The 8-32 x 1 inch screw size connects the pull through standard drilled cabinet fronts, supporting precise alignment when set into pre-bored, perpendicular holes.
This Pro Value Series steel bar pull from the Steel collection uses a stainless steel finish, which suits cabinet and furniture projects that use stainless appliances or hardware. The 8-13/16 inch (224 mm) center to center measurement fits layouts designed around metric drilling patterns, which is common in many shop-built cabinets. Because the overall length is 12 inches, the pull works on wider drawers where a longer handle helps distribute pulling force closer to the ends. The 1/2 inch width keeps the bar visually narrow, which can complement flat-panel and slab door styles that call for simple lines. A 1-5/16 inch projection supports use on framed or frameless cabinets, because the grip stands off far enough for hands to wrap behind the bar. The Pro Value Series product class places this handle in a consistent line, which helps keep style uniform across an installation that mixes different lengths.
The 224 mm center to center spacing on this STBAR224-SS bar pull gives installers a fixed drilling reference, which reduces layout time when repeating the same dimensions across multiple fronts. Using an 8-13/16 inch hole spread also helps align with standard jigs that reference metric bar pull patterns. The 12 inch overall length provides visual coverage across the face of larger doors and drawers, which helps balance the hardware with the cabinet proportions. With a 1-5/16 inch projection, the bar stands off the surface enough that the hand clears door edges, which can reduce wear around the hardware area over time. The 1/2 inch wide bar keeps contact points small, which can make alignment adjustments more straightforward against flat fronts. The specified 8-32 x 1 inch screw size supports a direct connection through typical cabinet materials, which contributes to solid seating when the pull is tightened against the door or drawer.
The STBAR224-SS bar pull has a 224 mm (8-13/16 inch) center to center dimension, which sets the drilling distance for mounting holes on cabinet doors and drawers.
The Pro Value steel bar pull has a 12 inch overall length, which provides a long gripping area across wider drawers and taller doors on cabinetry.
This handle is made from steel with a stainless steel finish, giving projects a familiar stainless appearance that coordinates with many cabinet and appliance setups.
The STBAR224-SS pull has a 1-5/16 inch projection, positioning the bar off the cabinet face to provide finger clearance during opening and closing.
This stainless steel cabinet bar pull is 1/2 inch wide, giving it a slim profile that pairs well with modern, flat-panel cabinet fronts.
This Pro Value Series handle is specified for 8-32 x 1 inch screws, allowing it to mount through standard cabinet door and drawer fronts drilled for machine screws.
This Pro Value Series STBAR224-SS bar pull combines a 224 mm (8-13/16 inch) center to center layout with a 12 inch overall length, which suits wider doors and drawers in coordinated runs. The steel construction and stainless steel finish from the Steel collection support projects centered around stainless hardware. With a 1-5/16 inch projection and 1/2 inch width, the handle offers finger clearance while keeping a slim profile on modern cabinet designs. The specified 8-32 x 1 inch screw size aligns with common cabinet drilling, which helps this pull integrate into standard shop workflows when selecting hardware for new installations or upgrades.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZLUXEBAR224-BN Mfr# SZLUXEBAR224-BN | PRO LUXE PRO LUXE Pull 8-13/16" (224 mm) Center to Center, Brushed Nickel, SZLUXEBAR224-BN |