Blum TANDEMBOX Bottom Mount Trash Pullout, White, 356M55B7SAF-W

White TANDEMBOX Waste and Recycle Set for an 18-Inch Cabinet Opening

This is the Blum TANDEMBOX bottom-mount waste and recycle set in White, engineered for an 18-inch cabinet opening. It brings Blum's drawer system engineering to an under-counter waste station, delivering the smooth, controlled motion a TANDEMBOX runner is known for in a dedicated pull-out configuration built for kitchen or utility room use.

Key Features

• 18-inch minimum opening width — sized for a standard base cabinet dedicated to waste and recycling.
• 21-5/8-inch runner length — TANDEMBOX runners provide full access to the pull-out interior when the door swings open.
• Steel construction in White — painted steel sides coordinate with white cabinet interiors and keep the enclosure looking intentional rather than aftermarket.
• Left- and right-hand compatible — the set works with either door-hinge orientation, so cabinet layout does not dictate placement.
• TANDEMBOX runner system — runs on the same engineered Blum platform used throughout the kitchen, sharing adjustment and mounting logic with the rest of the drawer stack.
• Bottom-mount configuration — the runners mount below the waste enclosure, keeping the full side height clear for bins and bags.

Where This Set Fits the Job

A dedicated 18-inch waste cabinet is the standard solution in kitchen layouts where recycling and trash share one pull-out bay. This set occupies that cabinet opening and turns it into a functioning station rather than a loose-bin situation under the sink. It suits new kitchen builds and cabinet renovations alike, and because the TANDEMBOX platform is already common in production kitchens, shops familiar with that system can install this pull-out without learning a separate hardware language. It also works well in laundry rooms, utility rooms, or pantry bays where a covered waste station makes sense alongside other storage drawers.

White Finish in a Working Kitchen

The White finish does specific work here. Waste pull-outs live inside a cabinet, but the interior is visible every time the door opens. A painted White steel enclosure reads as part of the cabinet rather than a utility insert, which matters in kitchens where white interiors, white drawer systems, or white laminate boxes are already running. Steel construction keeps the enclosure rigid under the repeated loading and unloading that a waste station sees daily. The finish is consistent with other Blum TANDEMBOX White components, so a shop already specifying White TANDEMBOX throughout the project can match this pull-out to the rest of the drawer stack without a visible break.

Specifying and Ordering This Set

Cabinet shops and designers specifying waste pull-outs for white-interior kitchens can treat this set as a matched component in a TANDEMBOX build. Because it shares the TANDEMBOX platform, the front fixing, adjustment, and door-mounting logic already in the project applies here. Contractors installing a replacement pull-out in an existing 18-inch waste cabinet will find the left- and right-hand flexibility useful when the original door hinge position is fixed. Homeowners retrofitting a waste station into a base cabinet should verify the cabinet's interior opening is at least 18 inches wide and that the cabinet depth accommodates the 21-5/8-inch runner length before ordering.

A Waste Station That Matches the Rest of the Kitchen

When every other drawer in a white-interior kitchen runs on Blum TANDEMBOX, a matching white waste pull-out keeps the build consistent from top to bottom — same platform, same motion, same finish language throughout the cabinet stack.