Nickel Finish and Half Overlay Fit in One Dependable Hinge

This Blum CLIP top BLUMOTION hinge is built for half overlay doors on frameless and face-frame cabinets, delivering soft-close performance in a nickel finish with a screw-on mount at 110 degrees of opening.

Key Features

• BLUMOTION soft-close damps the door over the final degrees of travel so it settles quietly without slamming.
• Half overlay, half crank arm positions the door to cover part of the cabinet side, the standard geometry for two doors sharing a center partition.
• 110 degree opening provides the everyday swing for standard cabinet access.
• Screw-on mount fastens the hinge arm directly to the base plate with wood screws for a solid, reliable connection.
• Three-way adjustment allows height, side, and depth fine-tuning after the door is hung.
• Nickel finish on plated steel coordinates with brushed and satin metal hardware throughout the space.

Where Half Overlay Doors Come Together

Half overlay is the geometry for doors that cover part of the cabinet side rather than the full panel, and it is the correct choice wherever two doors share a single center partition. Each door takes a half crank hinge so both arms clear the partition without colliding. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted on the cabinet side or face-frame stile. The base plate is a separate purchase, matched to your cabinet construction and available in Blum's own plate range. This hinge works on both frameless and face-frame cabinets, so it covers remodel work where the two box types appear on the same job.

A Nickel Finish Built to Stay Consistent

The hinge body is plated steel finished in nickel, a tone that reads as warm and neutral alongside satin pulls, knobs, and bin handles in the same room. Because this is a concealed hinge, the finish is visible only when the door stands open, but on glass-front and open-frame cabinets where the hardware shows, the consistent nickel keeps the interior looking intentional. BLUMOTION's integrated soft-close takes the impact out of daily closing, which protects both the finish on the door edges and the reveal alignment over time.

The Right Call for Shared-Partition Installs

Reach for this hinge on double-door cabinets, pantry runs, and base cabinets where pairs of doors meet at a center stile or partition. It suits cabinet shops building face-frame boxes as readily as those running frameless production, and the screw-on mount fits workflows that skip system-hole drilling entirely. The three-way adjustment handles the fine work of bringing two doors on a shared partition to an even reveal. For doors 16 to 22mm thick in a standard build, this hinge covers the install. Doors over 22mm need a thick-door hinge instead.

Common Questions

Quiet Doors, Even Reveals, Clean Nickel

When the job calls for half overlay doors that close quietly and line up evenly across a run, this hinge delivers the geometry, the damping, and the finish in a single part.