Blum CLIP Top Nickel Hinge for Flush Inset Doors

This Blum CLIP top hinge is built for inset doors that sit flush inside the cabinet opening, with BLUMOTION soft-close and INSERTA tool-free mounting for both frameless and face-frame cabinets.

Key Features

• BLUMOTION soft-close damps the door through the final degrees of closing so it settles silently against its tight inset reveal.
• Inset geometry with full crank arm positions the door flush inside the opening with an even gap on every edge.
• 110 degree opening delivers the standard everyday swing for cabinet access.
• INSERTA tool-free plate mounting presses the base plate into pre-drilled 5mm system holes without screws.
• Three-way adjustment moves the door in height, side, and depth so the reveal stays even after the cabinets are set.
• Nickel finish on plated steel coordinates cleanly with other visible hardware.

Fitting Doors Flush Inside the Opening

An inset door does not overlap the cabinet side — it sits inside the opening with a small, consistent gap framing all four edges. That look depends on the hinge carrying the correct inset geometry, and this one does. The 35mm cup bores into the door back; the arm then clips to a Blum base plate mounted to the cabinet, sold separately. Once clipped, the three-way adjustment lets you dial the door into its reveal: side adjustment squares it left and right, height adjustment levels the top and bottom gaps, and depth adjustment pulls or pushes the face flush with the cabinet front. BLUMOTION earns its place on inset work because a closely fitted door absorbs more impact than an overlay door does when it closes — the damper takes that force out of the equation every time.

Nickel Steel Build for Lasting Alignment

The hinge body is plated steel in a nickel finish. Nickel reads as a warm, medium-value tone that pairs naturally with brushed hardware across kitchens, bathrooms, and furniture pieces without demanding an exact match. The clip-on arm disengages with a lever for door removal and reattachment without disturbing the plate position, which makes future adjustments or refinishing straightforward. INSERTA mounting means the plate goes in fast on any cabinet built on the 32mm system with 5mm pre-drilled holes.

Where This Hinge Belongs

Reach for this hinge on standard doors in the 16 to 22mm thickness range on frameless or face-frame cabinets wherever a flush, inset look is the design goal. It suits furniture makers, custom cabinet shops, and finishing contractors who need inset geometry with a quiet close and want the install efficiency that INSERTA and clip-on mounting provide. For cabinets without pre-drilled 5mm system holes, the screw-on plate version is the right pairing instead. Doors thicker than 22mm need a thick-door hinge rather than this standard cup. And for doors that overlay the cabinet side rather than sitting inside it, the full overlay or half overlay versions of this CLIP top line are the correct choice.

Common Questions

A Flush Face That Closes Without a Sound

Specify this hinge when the design calls for inset doors that close quietly, hold their reveal, and give the installer a fast, adjustable mount on either cabinet type.