A Reliable Nickel Hinge for Full Overlay Doors on Any Cabinet Build

This Blum CLIP top hinge brings self-close and INSERTA toolless mounting to full overlay doors on both face-frame and frameless cabinets, finished in nickel for a clean, hardware-consistent look.

Key Features

• Self-close spring pulls the door shut over the last few degrees so it does not hang open.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• INSERTA toolless mounting presses the base plate into pre-drilled 5mm system holes with no screws required.
• 110 degree opening delivers standard everyday swing for comfortable cabinet access.
• Three-way cam adjustment dials height, side, and depth so doors align precisely after installation.
• Nickel finish on steel keeps the hardware tone consistent with other nickel pulls, knobs, and slides in the same space.

Hanging Full Overlay Doors Cleanly

Full overlay is the workhorse geometry of modern cabinetry: the door covers the cabinet side with just a thin reveal, giving a continuous face across a run. This hinge handles that position on both frameless boxes and face-frame cabinets, so one part number works across mixed builds on the same job. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted on the cabinet side or frame. That base plate is ordered separately and must be a Blum plate matched to your cabinet construction and preferred plate height. INSERTA makes the plate install fast: the pre-mounted system screws press straight into the cabinet's 5mm line-bore holes without a screwdriver.

Nickel Steel Through Daily Use

The hinge body is plated steel in a nickel finish. For a designer or a cabinet shop specifying hardware across a full kitchen, the finish decision matters as much as the mechanism. Nickel reads as a warm neutral that sits comfortably beside satin brass, chrome, and stainless pulls without competing. The self-close spring carries the door to a closed position reliably, and the three-way adjustment keeps that position dialed in as cabinets settle over time.

Where This Hinge Belongs

This is the right choice when a project calls for self-close rather than soft-close, the finish budget or design direction lands on nickel, and the cabinet shop or contractor wants INSERTA speed on a line-bored frameless box. It also fits face-frame work where INSERTA is already part of the workflow. For doors in the standard 16 to 22mm thickness range, this is a straight pick. Doors beyond 22mm call for a thick-door hinge. If the project demands a cushioned, damped close rather than a spring pull, the BLUMOTION soft-close version of this line is the alternative to quote.

Common Questions

The Nickel Finish That Holds the Whole Room Together

Specify this hinge when the design is built around nickel hardware, the install relies on INSERTA speed, and a dependable self-close spring is exactly what the job needs.