Description
Fineline 24" 12VDC Stick Linking Cord Use
Fineline 24" 12VDC Stick Linking Cord links two Tresco Fine line LED sticks together in a 12 V system, creating a continuous lighting run that keeps multiple stick fixtures operating as one connected assembly. This linking cord measures 60 cm, so it bridges a moderate gap between sticks while maintaining the designed spacing in the run. The cord is built as a connecting cable for Tresco Lighting, so it matches the Fine line LED stick interface in both voltage and connection style. By using a dedicated Tresco connecting cable, the LED sticks stay within their intended 12 V power path, which supports consistent light output across the run. This cord functions as part of the Tresco fixtures system, so the same 12 V DC feed can be carried from one Fine line LED stick to the next without re-routing separate runs.
Key Linking Cord Details For LED Runs
- This Fineline 24" (60 cm) 12VDC Stick Linking Cord links two Tresco Fine line LED sticks together, so installers can extend a single run while keeping all sticks powered from the same source for a clean, connected layout.
- The cord operates at 12 V DC, matching Tresco Fine line LED fixtures, which keeps the wiring in the same low-voltage class and supports consistent performance across the connected sticks in the run.
- This product is a connecting cable from Tresco Lighting, designed as part of their system, which helps maintain compatibility across Tresco transformers, power cables, connecting cables and switches in one coordinated installation.
- The 60 cm length gives flexibility when positioning two Fine line LED sticks, allowing installers to span modest gaps or adjust spacing while still treating the assembly as a single powered lighting line.
Linking Cord Fit In 12 VDC Installations
This 60 cm 12V DC stick linking cord fits directly between two Tresco Fine line LED sticks, so the connection path stays within the intended Tresco 12 V system. Because the cord is specified as a 12VDC connecting cable, it carries power across the gap without changing the voltage class of the run. Using a stick-to-stick linking cord from Tresco Lighting keeps the interface consistent from one LED stick to the next, which supports straightforward routing along cabinets, casework, or other surfaces. The defined 60 cm length also helps installers plan their layout, since each link has a known span between fixtures.
Using This Linking Cord In Lighting Runs
Where This Tresco Linking Cord Fits Best
This Tresco Lighting connecting cable fits between two Tresco Fine line LED sticks in a 12 V installation, so it serves whenever two segments of Fine line LED fixtures need to be tied together electrically. The 60 cm length works well where LED sticks are mounted along a continuous surface and must bridge short gaps, such as over breaks in cabinetry or between separated mounting points. Because the cord is defined as a stick linking cord for Fine line LED sticks, it aligns with runs that are specifically built from that Tresco fixture family. The product sits in the Lighting, Connectors and Connecting Cables category, so it belongs in the wiring path rather than the fixture body, which simplifies separating fixture placement from power routing.
Details That Support Consistent LED Stick Results
The fact that this cord links two Tresco Fine line LED sticks together means the voltage and connection style are matched to those fixtures, which helps maintain even light levels from one stick to the next along the run. Its 12 V DC rating keeps the entire linked assembly in the same low-voltage class, supporting predictable behavior with Tresco transformers already sized for 12 V loads. Being part of Tresco Lighting connecting cables, it works with Tresco transformers, power cables, connecting cables and switches described for these fixtures, so the installer can keep the run inside a single designed system. This consistency reduces reworking of layouts, because the same style of linking cord can be applied anywhere two Fine line LED sticks need to connect within the 60 cm span.
Common Questions About This Tresco Linking Cord
What does the Fineline 24" 12VDC Stick Linking Cord connect?
The Fineline 24" 12VDC Stick Linking Cord links two Tresco Fine line LED sticks together, so power continues from one stick to the next as part of a single 12 V lighting run.
How long is this Tresco Fine line LED stick connector?
The Tresco Fine line LED stick connector is 60 cm long, giving installers a defined span for planning distance between two connected LED sticks in a 12 V system.
What voltage system does this linking cord support?
This linking cord is specified for 12 V DC, so it fits directly into Tresco Fine line LED stick installations that operate on a 12 V low-voltage lighting system.
Is this cord part of the Tresco Lighting system?
This cord is a Tresco Lighting connecting cable and is described for use with Tresco fixtures, transformers, power cables, connecting cables and switches in one coordinated system.
What is the role of this cable in an LED stick layout?
The cable acts as a stick-to-stick link, carrying 12 V DC from one Tresco Fine line LED stick to another so the layout operates as a continuous lighting run.
What is the manufacturer part number for this cord?
The manufacturer part number is L-LED-STKLNK-60-1, which identifies this specific 60 cm, 12 V DC Fineline stick linking cord in the Tresco Lighting range.
Selecting This Cord For Tresco LED Runs
This Fineline 24" (60 cm) 12VDC Stick Linking Cord from Tresco Lighting gives installers a defined way to join two Tresco Fine line LED sticks into one 12 V run. By matching the specified 12 V DC rating and dedicated Fine line stick role, it fits directly into Tresco lighting layouts that use transformers, power cables, connecting cables and switches from the same system. For projects using Tresco Fine line LED sticks, this linking cord offers a straightforward method to carry power from one stick to the next while keeping the assembly inside the intended Tresco 12 V structure.
