QG Hook Vertical Bracket Kit is a Quiet Glide rolling barn door hardware component that supports a rail using a vertical hook-style bracket, which helps create a stable mounting point for the door track in a barn door installation. The kit is part of the Rolling Barn Door Hardware product class, so it works within that hardware system to hold the rail structure in place during daily door operation. The bracket has a 3/4 inch rail bracket size, which provides a defined interface for rails designed around that dimension in typical barn door layouts. Quiet Glide branding identifies it as part of a consistent hardware line, which helps maintain visual and dimensional continuity when using multiple Quiet Glide components together on the same opening.
The bracket height of 2-23/32 inches provides a compact vertical profile, which helps when mounting under low headers or near ceiling lines in tight barn door locations. The 3/4 inch width keeps the bracket narrow, which is useful when aligning hardware between obstructions such as casings or adjacent fixtures. The 1-1/2 inch projection sets a consistent stand-off from the wall, which supports even rail spacing along the opening so the door can travel without interference. The rail bracket size of 3/4 inch links the bracket to rails designed around that dimension, which simplifies choosing matching rail components within the Rolling Barn Door Hardware category. These fixed dimensions give a predictable footprint that can be laid out accurately on walls and support framing.
This bracket kit is categorized as Rolling Barn Door Hardware, which means it is intended for use wherever a sliding barn-style door rail needs a vertical hook-style support point along a wall. The 3/4 inch rail bracket sizing focuses it on rail sections built to that dimension, which helps align the rail profile to the hook area of the bracket for consistent engagement along the track. With a height of 2-23/32 inches, the bracket fits well in wall areas with limited vertical space above the rail where larger brackets could conflict with trim or framing. The 3/4 inch width keeps each mounting location relatively slim, which is useful when placing multiple brackets along a long rail where visual spacing and edge distance must work around existing wall details.
The Hammered Antique Brass finish pattern may vary, so every installed bracket can show slight differences in surface texture while still reading as hammered antique brass, which helps the hardware blend into traditional or rustic door designs. The 1-1/2 inch projection provides a defined stand-off distance from the wall, which supports positioning of the rolling door so it clears baseboards or light trim along the opening. Because the kit is labeled as a QG Hook Vertical Bracket Kit, it is clear that the component is designed as a hook-style vertical support, which helps maintain rail stability when the door is in motion. The manufacturer part number QG.301.03 ties this specific hammered antique brass pattern and dimension set to an identifiable component, which helps keep hardware selections consistent across multiple doors or openings that are meant to match visually.
QG Hook Vertical Bracket Kit is a Quiet Glide rolling barn door hardware component, so it serves as a bracket for supporting a barn door rail in a sliding door system.
The bracket has a height of 2-23/32 inches, a width of 3/4 inch, and a projection of 1-1/2 inch, which define its installed footprint and rail stand-off from the wall.
The 3/4 inch rail bracket size sets the interface dimension for the rail, which helps align the bracket with rail profiles designed around that same measurement.
The bracket kit has a Hammered Antique Brass finish where the pattern may vary, which gives the installed hardware a hammered antique brass appearance with some textural variation.
The 1-1/2 inch projection sets how far the bracket and rail sit off the wall, which influences door clearance over trim and any wall irregularities.
The Quiet Glide brand identifies the kit as part of a Quiet Glide rolling barn door hardware line, which supports visual and dimensional consistency with other Quiet Glide parts.
The QG Hook Vertical Bracket Kit in Hammered Antique Brass pairs a 3/4 inch rail bracket size with a 2-23/32 inch tall body and 1-1/2 inch projection, giving clear dimensions for planning a rolling barn door rail run. The Quiet Glide branding and QG.301.03 part number identify the kit within a defined rolling barn door hardware family, which helps align your bracket choice with the same hammered antique brass finish across a project. Using these fixed measurements and finish details, you can match this bracket kit to barn door layouts that call for a hammered antique brass look and the specific rail offset defined by the 1-1/2 inch projection.