Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand front locking device for Grass America's Dynapro Eco undermount slide system, designed without a flange for installations where a clean, low-profile front fix is the right fit. It snaps onto the left slide member at the drawer front and secures the box in place with a single-axis height adjustment built in.
Front locking devices are what connect a drawer box to its undermount slides at the front. On the Dynapro Eco system, the locking device clips onto the slide's front end and captures the underside of the drawer box front, holding the box securely while allowing the front panel to be adjusted and re-adjusted as needed. The no-flange body keeps the profile compact, which matters in production cabinetry where drawer box fronts are dimensioned tightly and flange clearance is not always available. Once the box is seated and the height is dialed in — up to 3.5mm of upward correction on this 1D device — the front panel goes on straight, plumb, and level.
The locking device is molded in plastic, which is standard for this component class across the Dynapro system. Plastic construction keeps the part light, resists the moisture and cleaning products common in kitchen environments, and allows the snap-fit engagement that makes tool-free drawer removal and reseating practical. The green color is a system identifier, not a finish choice — it signals Dynapro Eco compatibility at a glance when multiple locking device types are in use on the same job.
Cabinet shops running Dynapro Eco undermount slides will need one left-hand and one right-hand locking device for each drawer opening. This part covers the left side. Installers working in face-frame cabinets or frameless production runs will both find it fits the same way — the locking device attaches to the slide, not to the cabinet construction. It suits any project where the Dynapro Eco slide is already specified and a no-flange front fix is either preferred or required by the drawer box design.
Yes. This listing covers the left-hand member only. You need one left-hand and one right-hand front locking device to complete a single drawer — order both to avoid a second shipment.
The flanged version includes a horizontal lip that registers against the drawer box front for additional support and alignment; the no-flange version omits that lip, giving a lower profile that works better when drawer front dimensions leave no room for a flange.
This device is specified for the Dynapro Eco series. Dynapro locking devices and front fixings are series-specific — confirm the slide series before ordering to avoid a mismatch.
The 1D designation means this device adjusts in one direction — height — with up to 3.5mm of correction. For side-to-side or depth adjustment, you would need a higher-dimension locking device. If your installation needs only vertical correction after hanging the front, this device covers it.
Getting the front locking device right the first time means the drawer goes on square, the front adjusts cleanly, and the job stays on schedule — one less reason for a second trip to the cabinet.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFDYNAPROECOFLD-R Mfr# F134101222233 | Grass America DynaPro Front Locking Device, Right Hand, Green, F134101222233 |
