6 Foot Rolling Door Hardware Kit For Barn Doors
6 foot rolling door hardware kit from Quiet Glide is a rolling barn door hardware set designed around a 6 foot solid aluminum rail, so it supports a typical single-door opening with a continuous track for the hangers to run on. The hammered oil rubbed bronze finish defines the visual style of the rolling components, which matters when the hardware will stay exposed in finished spaces. The kit features a Fleur-de-Lis rolling door design with long brackets, so the decorative hanger plates act as both structural supports and visible trim. The Quiet Glide QG.1200.07 part number identifies this specific hammered oil rubbed bronze configuration, helping match it to project schedules and documentation. This rolling door Fleur-de-Lis kit organizes the rail, stops, hangers, and guide into one coordinated system, so the parts are engineered to work together.
Key Rolling Door Details For Job Planning
- The 6 foot solid aluminum rail (QG400607) serves as the track for the rolling door, providing a straight running surface that defines the door travel distance.
- The stop kit (QG4007) works on the rail to limit travel, helping position the door at its open and closed ends for repeatable stopping points.
- The five QG20107 components accommodate a door up to 2-1/4 inches thick, so the hanging system is built for heavier or thicker door slabs within that dimension.
- The center guide QG120107 controls the door at the floor line, keeping the panel aligned along the opening so the door does not wander as it moves.
- The left stop QG120207 and right stop QG120307 fine-tune end-of-travel locations, which helps align the door edges where you want them relative to trim or wall.
- The two rolling hanging brackets QG120407 support the door from the rail, combining the Fleur-de-Lis decorative profile with structural hanging duty.
- All fasteners needed are included, so the mounting pieces supplied in the kit are matched to the rail and brackets for consistent fastening.
Mounting Rail, Stops, And Guides For Fit
The 6 foot solid aluminum rail in the Quiet Glide rolling door hardware kit establishes the mounting height and span, so layout starts by positioning this piece level above the opening. Because the kit accommodates a door up to 2-1/4 inches thick, planning the offset between the wall and door edge can be based on that capacity. The left stop, right stop, and separate stop kit are installed along the rail, creating defined end points for door travel that match the finished opening width. The center guide sits at the bottom of the opening, controlling the door path so the panel tracks parallel to the wall or jamb. Together, these elements create a guided path from top rail to floor guide around the 6 foot opening.
Using Quiet Glide Fleur-De-Lis Kit On Projects
Where This Rolling Barn Door Hardware Fits
This Quiet Glide rolling barn door hardware belongs in openings that suit a 6 foot solid aluminum rail, so it aligns with single-door spans within that track length. The hammered oil rubbed bronze finish lends itself to rooms where darker, textured metal complements surrounding finishes. Because the QG20107 components accept doors up to 2-1/4 inches thick, the kit works with stout wood door slabs that need more clearance and strength than thinner panels. The Fleur-de-Lis rolling hanging brackets bring a decorative shape to the visible hanger area, which matters in spaces where the hardware is part of the overall design. The center guide and rail-mounted stops keep the door aligned over repeated cycles, supporting applications where the panel is moved frequently.
How Specific Components Support Repeatable Results
The 6 foot solid aluminum rail QG400607 provides a rigid, continuous track, so each hanger bracket follows the same path every time the door moves along the opening. The dedicated stop kit QG4007, along with the left stop QG120207 and right stop QG120307, divides the rail into controlled start and stop zones, helping the door land consistently without guessing the end point. The QG20107 components that accommodate doors up to 2-1/4 inches thick give a defined capacity, which simplifies selecting a door slab that will work within the kit limits. The center guide QG120107 manages side-to-side position at floor level, so the door edge lines up predictably with casing or finished wall. The two QG120407 rolling hanging brackets distribute the door load to the rail while presenting the Fleur-de-Lis profile, combining appearance and function in one visible element of the assembly.
Common Questions About Quiet Glide QG.1200.07 Kit
What door length does the 6 foot rail support?
The 6 foot solid aluminum rail sets a 6 foot track length, so it supports a sliding path suited to a single door moving across an opening within that span.
How thick of a door can this rolling kit handle?
The QG20107 components in the kit accommodate a door up to 2-1/4 inches thick, which suits many solid wood or heavier door slabs sized within that dimension.
What is the purpose of the center guide QG120107?
The center guide QG120107 stabilizes the lower edge of the door, guiding its movement so the panel tracks straight and stays aligned with the opening.
How do the left and right stops help door positioning?
The QG120207 left stop and QG120307 right stop define end-of-travel positions on the rail, so the door consistently stops where you want at both ends.
What role do the rolling hanging brackets QG120407 play?
The two QG120407 rolling hanging brackets carry the door load on the rail while presenting the Fleur-de-Lis design, combining structural hanging with a visible decorative element.
How does the hammered oil rubbed bronze finish affect appearance?
The hammered oil rubbed bronze finish gives the rolling hardware a darker, textured look, which supports projects aiming for a traditional or rustic metal appearance.
Select This Rolling Door Kit For Coordinated Rail
This rolling barn door hardware kit from Quiet Glide groups the 6 foot solid aluminum rail, Fleur-de-Lis rolling hanging brackets, stops, center guide, and components for doors up to 2-1/4 inches thick into one matched system. The hammered oil rubbed bronze finish keeps the visible parts consistent across the rail-mounted hardware. For projects that call for a defined 6 foot track length, a decorative hanger profile, and a guided rolling path from rail to floor, this QG.1200.07 kit provides the specified combination in a single coordinated solution ready to integrate into the opening layout.
