6 foot rolling door hardware kit from Quiet Glide provides the core hardware to hang a standard 36 inch rolling door so you can build a smooth, functional opening in a straightforward track run. The hardware set is rated for a 250 lb weight capacity per hardware set, which supports substantial door slabs in many residential and light commercial situations. A 6 x 1 inch solid aluminum rail forms the structural track, giving a rigid, continuous path for the rollers along the full 6 foot opening width. Quiet and smooth rolling wheels carry the door along this rail, so the door panel moves with controlled, low-resistance travel across the opening. A durable powder coat finish on the hardware surfaces provides a protective coating in an oil rubbed bronze look, which supports consistent appearance across visible components during everyday operation.
This Quiet Glide rolling door cube stick hardware accommodates doors from 3/4 inch to 1-1/2 inch thick, which means typical interior door slabs and many custom builds fall within its grip range. The hardware is designed to hang a standard 36 inch door on a 6 foot rail, so the track length supports full door travel with room for stops at each end. Multiple wall mounting brackets along the 6 foot rail secure the track to the structure, creating a fixed reference line for alignment across the opening. Roller straps connect the door to the quiet and smooth rolling wheels, turning the door edge into a moving panel guided by the rail. A center guide at the floor and rail and floor stops work with the upper track to control door travel, contributing to predictable starting and stopping positions as the door is moved.
The QG rolling door cube stick hardware is configured around a 6 foot rail and a standard 36 inch door, so it suits openings where a single door panel needs to slide clear of the opening width. The 6 x 1 inch solid aluminum rail spans the opening and adjacent wall, providing enough length for the door to move fully out of the opening when open. Door thickness accommodation from 3/4 inch to 1-1/2 inch lets this hardware work with many interior wood or composite doors that fall within this range. The 250 lb weight capacity per hardware set supports doors built from dense materials up to that rating, which is useful when the design calls for a substantial slab. Quiet and smooth rolling wheels support applications where controlled, low-noise motion is important as the door crosses the opening.
The solid aluminum rail construction provides a consistent running surface for the rollers, which helps installers establish a straight, level line that the door will follow over time. Wall mounting brackets along the rail tie that line back to the wall structure at several points, which supports stable track positioning once the hardware is fastened. Roller straps suspend the door from the quiet and smooth rolling wheels, so the door weight is transferred into the rail through the rolling system rather than dragging across a floor. A center guide helps keep the bottom of the door aligned as it moves, reducing side-to-side wandering during travel. Rail and floor stops define the end points of movement, which helps protect surrounding finishes by limiting how far the door can slide in either direction in daily use.
The 6 foot rolling door hardware kit is designed to hang a standard 36 inch door, aligning the 6 foot rail length and stops with the travel needed for that opening width.
This Quiet Glide rolling hardware accommodates doors from 3/4 inch to 1-1/2 inch thick, letting it work with many typical interior door and custom slab constructions in that range.
The QG.1310.CS.07 hardware kit has a 250 lb weight capacity per hardware set, which supports heavier door materials up to that rating when properly installed on a suitable structure.
The rolling door rail is a 6 x 1 inch solid aluminum rail, providing a rigid, continuous track for the quiet and smooth rolling wheels along the full opening span.
This oil rubbed bronze rolling door kit uses a durable powder coat finish, giving the hardware a protective, colored coating on exposed track and hanger components.
The rolling door travel is guided by quiet and smooth rolling wheels on the solid aluminum rail, with a center guide and rail and floor stops helping control alignment and end positions.
This Quiet Glide 6 foot rolling door cube stick hardware kit, in an oil rubbed bronze durable powder coat finish, is built around a 6 x 1 inch solid aluminum rail, quiet and smooth rolling wheels, and a 250 lb weight capacity per hardware set. It is configured to hang a standard 36 inch door and accommodates doors from 3/4 inch to 1-1/2 inch thick, aligning with many interior door builds. When a rolling barn door hardware solution from a specialized builders hardware supplier is needed that matches these dimensions and ratings, this kit provides the core track, rollers, and guiding components for that opening layout.