Flammable solvent cleaner thinner from Formica Adhesives gives you a fast drying way to handle both thinning and cleanup on adhesive jobs, so you can keep spray work moving without long waits between steps. This 55 GAL FLAMMABLE SOLVENT CLEANER/THINNER, identified as Formica Corporation 689-55, is designed as a thinner and cleaner, which lets you use a single material for adjusting spray adhesive flow and for end-of-shift cleanup. The non ozone depleting formulation provides fast drying performance while maintaining an environmentally conscious profile, which helps keep work areas ready for handling and further operations sooner. Because this thinner/solvent is flammable, it is intended for use with flammable adhesives, which keeps material types aligned during spraying and cleaning. The 55 gallon size, sold by Wurth Baer Supply, supports high-volume shops that run multiple spray stations and need consistent solvent performance across jobs.
This flammable solvent cleaner thinner is recommended for thinning most spray adhesives, which allows adjustment of adhesive flow for spray guns so patterns stay consistent from piece to piece. Recommended use for cleaning most spray adhesives means you can use it to remove adhesive residue from equipment exposed to these products, which helps keep tips, nozzles, and surfaces clear for steady output. It can also be used for cleaning brushes and rollers, so the same material addresses adhesive cleanup on hand tools used for edge work or detail areas. The solvent is suitable for flushing through spray lines and spray guns, which clears internal passages of adhesive and supports repeatable performance on the next setup. Because this solvent is flammable and specified for flammable adhesives, it aligns material characteristics during both thinning and cleaning steps.
This 55 gallon flammable solvent cleaner/thinner from Formica Adhesives fits shops that rely on spray adhesives and want a single material for both adjustment and cleanup, which simplifies inventory across spray stations. Its recommended use for thinning most spray adhesives supports operations that dial in spray patterns for differing substrates or coverage targets, because one drum can serve multiple spray guns and booths. The ability to use it for cleaning brushes and rollers places the same solvent on adhesive detail work, so touch-up and edge application tools are cleaned with the same chemistry used on the main spray system. Its use for flushing through spray lines and spray guns lets the product serve maintenance roles at the end of shifts, keeping adhesive from curing in lines and internal passages. As a flammable thinner/solvent designated for flammable adhesives, it belongs in workflows built around those adhesive chemistries.
The fast drying characteristic of this solvent cleaner thinner means evaporated solvent leaves spray adhesive ready for subsequent handling sooner, which keeps production sequences tighter when panels cycle through spraying and placement. Its non ozone depleting formulation provides required thinning and cleaning performance without relying on ozone depleting components, which supports ongoing use in typical woodworking and laminating environments. Being recommended for thinning most spray adhesives, the solvent gives installers and fabricators a predictable way to fine-tune viscosity, so guns atomize adhesive evenly and reduce rework from uneven coverage. When used to clean brushes, rollers, and spray equipment, the same solvent that adjusted the adhesive also dissolves residues, which helps restore equipment surfaces closer to bare material between jobs. The 55 gallon size supports repeated maintenance and thinning cycles across weeks of operation, so settings and cleanup routines can remain consistent from job to job.
This flammable solvent cleaner thinner is designed for jobs using flammable spray adhesives, where thinning and cleaning of adhesive residues around spray equipment and tools are part of normal workflow.
The fast drying solvent cleaner thinner evaporates quickly after use, which allows adhesive films and cleaned tools to be ready for further handling or spraying in shorter intervals.
This solvent cleaner thinner is recommended for thinning most spray adhesives, so it can adjust adhesive viscosity to support consistent spray patterns through compatible spray equipment.
The solvent cleaner thinner can be used for cleaning brushes and rollers after applying spray adhesives, dissolving residual adhesive so tools are ready for later use.
The solvent cleaner thinner can be flushed through spray lines and spray guns, clearing adhesive buildup from internal passages to support steady operation on future adhesive runs.
This thinner/solvent is flammable and is specified for flammable adhesives, aligning material characteristics during thinning and cleaning steps in adhesive workflows.
Formica Adhesives flammable solvent cleaner thinner 689-55 offers fast drying, non ozone depleting performance for thinning most spray adhesives and cleaning related tools, which supports efficient adhesive workflows. The 55 gallon size from Wurth Baer Supply suits multi-station operations that depend on consistent solvent behavior for spray line flushing, brush and roller cleanup, and spray adhesive adjustment. For shops working with flammable spray adhesives and needing a single solvent for both thinning and cleaning, this product delivers a unified approach that aligns with adhesive chemistry and daily production routines.
Sold In: 1 Each