Nickel Blind Corner Hinge for Overlay Face-Frame and Frameless Cabinets

This Grass Tiomos blind corner hinge handles the overlay door on a cabinet positioned beside a wall or adjacent cabinet, where a standard hinge would let the door swing into the obstruction. It runs on the Tiomos platform with integrated soft-close and a screw-on mount, finished in Nickel.

Key Features

• Blind corner geometry limits the swing so the door clears an adjacent wall or cabinet without collision.
• Integrated soft-close slows the door over the final degrees of closing so it settles quietly.
• 110 degree opening angle delivers practical everyday access within the corner application.
• Overlay straight arm positions the door over the cabinet side for a standard overlay reveal.
• Screw-on mount fastens to the cabinet with wood screws, no system holes required.
• Three-way adjustment moves the door height, side, and depth to dial in an even reveal after install.

The Right Hinge When the Wall Gets in the Way

A blind corner cabinet sits tight against a wall or another cabinet, and the door on that side cannot swing freely without hitting something. This hinge is built for that condition. Its geometry restricts the opening arc so the door travels to 110 degrees and stops before it contacts the adjacent surface. That 110-degree limit is the correct engineering for the application, not a shortcoming. On a standard cabinet with clear swing, a full-range hinge is the better choice. Here, the restricted arc keeps the door safe and the cabinet functional.

The 35mm cup bores into the back of the door and the arm screws to a matching base plate mounted to the cabinet, ordered separately. Plates are Grass-specific, so use a Grass Tiomos plate matched to your cabinet construction and door position. The hinge accepts doors up to 24mm thick, covering standard 18mm and 19mm panels as well as slightly thicker doors without needing a thick-door variant.

Tiomos Build in Nickel

The hinge is steel finished in Nickel, consistent with the rest of the Tiomos line and easy to coordinate with other Nickel hardware across the project. The soft-close damper is built into the hinge body, so there is no add-on mechanism to clip on later. Three-way adjustment spans plus 3mm to minus 2mm in height, side, and depth, which is enough range to square up a door after the cabinet is set and the door is hung.

For the Corner Cabinet That Needs It Done Right

This hinge suits cabinet shops, installers, and remodelers working on kitchens or built-ins where at least one cabinet runs into a wall or butts up against another box. It works on both frameless and face-frame construction, so the same hinge covers a production run that mixes cabinet types. The screw-on mount is an advantage where the cabinet does not have pre-drilled 5mm system holes, since the screws go straight into the cabinet side without any special boring prep. If your adjacent cabinets use standard Tiomos hinges, this blind corner version keeps the hardware family consistent across the whole run.

Common Questions

Corner Cabinets Finished Clean

When the layout puts a door next to a wall and a standard hinge cannot do the job, this Tiomos blind corner hinge closes the gap, literally, with soft-close, three-way adjustment, and a Nickel finish that matches the rest of the run.