Grass Tiomos Blind Corner Hinge For Inset Doors

Grass Tiomos blind corner hinge is a concealed cabinet hinge from Grass America designed for blind corner construction. This hinge is built for inset overlay face-frame and frameless applications, so it suits both traditional face-frame cabinets and frameless runs using a blind corner layout. As a concealed cabinet hinge, it keeps the hardware out of sight when the door is closed, which supports a clean cabinet look while preserving access. The hinge belongs to the Grass Tiomos line, so it follows the same movement system cabinet shops already recognize across Tiomos installations. The self-close function is built into the hinge, so once the door is within the closing range the hinge pulls it shut, reducing the chance of doors drifting open on corner units. With its blind-corner-specific geometry, the hinge allows builders to use otherwise difficult corner space with a controlled and predictable door swing.

Key Functional Details For Cabinet Builders

• The 110 degree opening angle lets the blind corner door open wider than a standard overlay hinge, which helps create better access into hard-to-reach corner storage behind adjacent cabinets.
• The hinge is specified for blind corner construction, so its kinematics are tuned to clear neighboring fronts where a standard concealed hinge would cause binding or door collision near the corner.
• Grass Tiomos hinges feature a 3-dimensional adjustment mechanism with a suitable base plate, giving height, width, and depth tuning so installers can dial in even, consistent reveals around adjoining doors.
• Convenient depth adjustment with a worm gear provides precise in-and-out positioning from the cabinet interior, which helps align the door plane with nearby fronts on face-frame and frameless runs.
• The self-close feature controls the final part of the swing, so once aligned the door seats firmly against the cabinet, supporting consistent gaps at the corner over repeated use.

Mounting And Adjustment For Blind Corner Runs

This Tiomos 110 degree blind-corner hinge mounts as part of blind corner construction, so it is laid out where two cabinet runs meet at a corner. The hinge works with a suitable base plate for 3-dimensional adjustment in height, width, and depth, letting installers fine-tune the position of inset doors relative to the face-frame or frameless edge. Depth adjustment uses a worm gear, so a turn of the adjustment screw shifts the door in controlled steps without loosening the hinge arm. With self-close built into the hinge, the final fit of the adjusted door is maintained each time it shuts, which supports repeatable reveals on corner units exposed to frequent use.

Using This Hinge In Corner Cabinet Projects

Where This Grass Tiomos Hinge Is Applied

This Grass Tiomos self-close inset overlay face-frame and frameless blind corner hinge is used on cabinets built with blind corner construction, where part of the corner opening is closed off behind adjacent cabinets. Its 110 degree opening angle is suited to these layouts because it allows the corner door to swing past the face of neighboring cabinets, improving access without converting to a full diagonal corner unit. As a concealed cabinet hinge, it mounts inside the cabinet and on the door so the door front remains free of visible hinge hardware, which aligns with modern and transitional cabinet programs using blind corner storage. Because the hinge is part of the Tiomos family, shops already using Grass Tiomos on straight runs can keep a consistent motion and appearance when they reach the blind corner section.

How Tiomos Adjustments Support Precise Corner Fits

Grass Tiomos hinges feature a 3-dimensional adjustment mechanism with a suitable base plate, giving height, width, and depth correction from inside the cabinet. On blind corner installations, the height adjustment helps level the corner door with nearby fronts across the vertical grain or rail lines. Width adjustment lets the installer center the door across the opening or tweak overlay at the stile, which is critical where a small shift may cause rubbing at the corner edge. Depth adjustment with a worm gear moves the door closer to or farther from the cabinet, which is especially important on inset layouts because it determines how the door sits within the face-frame or flush plane. The worm gear design means each turn translates into a controlled depth change, supporting precise alignment of the door face with neighboring units without repeated loosening. When the 3-dimensional adjustments are correctly set, the self-close action then pulls the door back to the same seated position every cycle, helping maintain clean reveals at a busy kitchen or shop corner over time.

Common Questions About This Tiomos Corner Hinge

Selecting This Hinge For Corner Cabinet Work

Choosing the Tiomos 110 degree blind corner hinge F045138484223 brings a concealed cabinet hinge tailored to blind corner construction into the project. The 110 degree opening angle, 3-dimensional adjustment with a suitable base plate, and worm gear depth adjustment give installers meaningful control over fit on both face-frame and frameless layouts. With self-close built into the hinge, the finished blind corner cabinet keeps its door seated at rest, supporting consistent alignment across the corner run.