Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Grass Tiomos hinge is built specifically for cabinet boxes set at a positive 45-degree angle, hanging inset doors that sit flush inside the opening on face-frame or frameless construction, with a self-close spring included.
Standard concealed hinges are engineered for cabinets that face straight ahead. Diagonal and bay cabinets sit at an angle to the wall or adjacent cabinets, and a standard arm cannot swing the door clear of that geometry. This hinge's +45-degree arm is shaped to clear the outward-facing cabinet angle so the inset door opens fully and closes squarely without binding. The 35mm cup bores into the back of the door and the arm connects to a Grass base plate mounted to the cabinet, ordered separately. Plates are Grass-specific and should be matched to this hinge's series and mounting pattern.
The hinge is steel in a Nickel finish. The screw-on mounting locks the arm to the plate with screws rather than a clip or snap, giving a solid, fixed connection suited to the precise fitting that inset work demands. Once mounted, the three-way adjustment handles the fine positioning: up to 3mm each in height, side, and depth lets you bring the door face flush with the cabinet front and set an even gap on every edge. Maximum door thickness is 24mm, covering both standard and slightly heavier inset panels.
Cabinet shops building angled or bay cabinet runs are the primary audience for this hinge. It suits face-frame and frameless boxes alike, so it fits traditional and modern construction depending on what the project calls for. Inset work in an angled cabinet is a precision job: the door must clear the opening angle and sit flush, which is why both the arm geometry and the three-way adjustment matter here. For a project that needs a cushioned, damped close rather than a spring pull, a soft-close version of this Tiomos series is the one to specify instead.
The arm is shaped for a cabinet set at a positive 45-degree angle rather than a straight-facing box. On a diagonal or bay cabinet, a standard arm cannot swing the door clear of the angled opening. This arm geometry handles that clearance.
No. The hinge body attaches to a separate Grass base plate that mounts to the cabinet, and the plate is sold separately. Use a Grass plate matched to this series; plates from other brands will not connect to this hinge.
No. This hinge is self-close: a spring draws the door shut over the last few degrees. It closes on its own but does not cushion the contact. Soft-close adds a damper to slow the door at the end of its travel. For a damped close, choose the soft-close version of this series.
Yes. This hinge suits both face-frame and frameless construction. The plate selection changes between the two cabinet types, so match the Grass base plate to your cabinet build.
When the design calls for a flush inset door on a 45-degree angled or bay cabinet, this Tiomos hinge provides the geometry, the spring close, and the adjustability to get it square and keep it there.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF045138482223 Mfr# F045138482223 | Grass Tiomos 110 ° +45 Degree Angle Corner Inset Hinge Self-Closing Dowel F045138482223 1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF072135500247 Mfr# F072135500247 | Tiomos Hinge Arm Cover Cap All Crankings, Nickel-Plated | ||||
Sold in: 1 Each |  GFF072135503228 Mfr# F072135503228 | Tiomos Hinge Cup Cover Cap, Nickel-Plated | ||||
Sold in: 500 Each |  GF81001 Mfr# 81001-43 | Wood Screws FHP, Nickel-Plated #6 Gauge 5/8" Length, Nickel-Plated - 500 Box Qty |
