Tiomos Adjustment Wing Mounting Plate For Precise Hinges

Tiomos adjustment wing mounting plate gives you a screw-on hinge base built for 4-point fixing, so the hinge loads spread across four fastening points and help the hinge stay aligned under regular door use. The plate design uses height adjustment via worm gear, allowing controlled vertical changes that help dial in door reveals without loosening overall mounting. This wing mounting plate is part of the hinge mounting plates product class, so it serves as the interface between the hinge arm and the cabinet, tying the Tiomos hinge system to the carcass. The plate is made from steel, giving a rigid base that supports consistent hinge position when the door is opened and closed. A nickel-plated finish covers the steel, providing a smooth surface that works well in standard cabinet environments. The mounting style is screw-on for wood screws, so it is suited to wood cabinet constructions where direct screw fastening is used.

Key Mounting Plate Details For Daily Work

• The 4-point fixing layout spreads the hinge load over four screw positions, helping maintain door position when cabinets are opened repeatedly and reducing movement at the mounting area over time.
• Height adjustment via worm gear gives a fine-threaded adjustment path, so vertical shifts of the hinge side can be made gradually while holding the plate firmly during setup.
• This mounting plate is designed as a screw-on solution for wood screws, matching typical cabinet carcass construction where direct screw fastening into wood is the standard practice.
• The plate is produced from steel, which provides a solid base that supports the hinge arm and helps keep hinge geometry stable when doors swing open and closed.
• A nickel-plated finish over the steel creates a clean, metallic surface that integrates visually with nickel-finished hinges often used in cabinet interiors.

Screw-On Mounting Plate Setup And Adjustment

This hinge mounting plate uses screw-on installation for wood screws, so it fastens directly to wood cabinet material during layout and hanging. The 4-point fixing pattern arranges four screw positions around the hinge interface, which helps position the plate securely against the cabinet surface while you align doors. Once fitted, height adjustment via worm gear lets you move the plate vertically in small increments by turning the adjustment mechanism, supporting straightforward reveal tuning without shifting the main screw pattern. The 3.5mm specification identifies this particular Tiomos adjustment wing mounting plate version, tying the plate to its stated size reference in the product name.

Using This Grass Hinge Mounting Plate On Jobs

Where This Tiomos Mounting Plate Fits Best

This Tiomos adjustment wing mounting plate is part of the Grass America hinge mounting plates line, placing it within a system approach to cabinet hinge hardware. The plate is meant for use wherever a hinge mounting plate is required between a Tiomos hinge and a cabinet side or frame, because it provides the mechanical interface for that connection. Its screw-on design for wood screws suits wood-based cabinet construction, such as carcasses and frames built from panel stock or solid wood, where direct screwing is the normal fastening method. The 4-point fixing pattern sets four screw locations around the hinge connection area, which helps distribute working forces from the hinge into the cabinet side. This mounting style is useful on cabinet runs where repeated opening and closing is expected, since the spread of load across four points supports the installed hinge layout. The nickel-plated steel construction matches cabinet interiors that use similar hinge finishes, aligning visually with other nickel-plated hinge components in the assembly.

Why Worm Gear Adjustment Supports Reliable Alignment

The height adjustment via worm gear on this hinge mounting plate provides a controlled vertical adjustment method, because the worm gear translates turning into gradual movement along a fine thread. This means the installer can change door position relative to the cabinet in small steps, which supports accurate reveal setting along the height of the door. With this style of adjustment, once the mounting screws for the 4-point fixing are set, the height change is concentrated at the worm gear mechanism rather than by moving the full plate. That helps preserve the main screw holding power while still allowing adjustment. The screw-on mounting for wood screws works together with the worm gear system by providing a secure base that the adjustment can act against. The 3.5mm designation in the product name marks a specific version of the Tiomos adjustment wing mounting plate, so it can be matched to that identifying size reference in project documentation. As a hinge mounting plate made from steel with a nickel-plated finish, it gives a rigid and consistent adjustment platform that ties the hinge action directly into the cabinet structure.

Common Questions About This Tiomos Mounting Plate

Selecting This Plate For Tiomos Hinge Projects

This Tiomos adjustment wing mounting plate from Grass America combines 4-point fixing, screw-on mounting for wood screws, and height adjustment via worm gear into one hinge base. For projects using steel, nickel-plated hinge hardware, this hinge mounting plate ties the Tiomos hinge system to wood cabinet structures while supporting controlled vertical door adjustment.