Screw-On Pie Cut Corner Hinge for Angled Cabinet Doors

This Grass Tiomos pie cut corner hinge is built for the angled door panel on a pie-cut or blind-corner cabinet, opening to 65 degrees with a self-close spring and a screw-on mount that works on both face-frame and frameless boxes.

Key Features

• 65 degree opening angle is the designed swing for a pie-cut corner door, letting it clear the adjacent cabinet without collision.
• Self-close spring pulls the angled door shut automatically once released within the closing range.
• Screw-on mount fastens directly to the cabinet with no tool-free plate system required.
• 35mm cup with 12.6mm depth bores into doors up to 24mm thick, covering standard and slightly heavier door stock.
• Three-way adjustment allows height, side, and depth movement of up to 3mm in each direction for final door alignment.
• Nickel finish on steel stays consistent with other Tiomos hardware across the same cabinet run.

The Corner Application This Hinge Is Designed For

A pie-cut corner cabinet has angled door panels that swing away from one another into the corner space. The geometry that makes those doors work is not a standard 110 degree swing; it is a tightly controlled 65 degree arc that keeps each panel from striking the adjacent door or cabinet face. This hinge provides exactly that arc. The restricted opening angle is the engineering solution for the corner, not a shortcoming. Install it on a cabinet without that angled geometry and the door will not align or function correctly.

The 35mm cup bores into the back of the door in the standard position. The hinge arm then screws to a base plate mounted on the cabinet, which is sold separately. Match the plate to your cabinet construction and to the Tiomos series, since Grass plates are not interchangeable with other brands.

Steel Build in a Working Nickel Finish

The hinge is steel with a nickel finish, the same material and finish that runs through the Tiomos line. Corners see more contact and repositioning than standard doors because the angled panels are often opened together, so the screw-on mount earns its place here. A fastened connection holds the geometry of a tricky corner through years of daily use better than a clip in applications where alignment tolerance is tight. The three-way adjustment gives you the fine-tuning needed to bring the reveal even after the cabinet is set, with up to 3mm of movement in each direction.

Where This Hinge Belongs

Specify this hinge for pie-cut corner cabinets on frameless or face-frame construction where a reliable self-close and a screw-on connection are the priorities. It suits cabinet shops laying out corner units, contractors installing pre-built corner cabinets on site, and designers specifying hardware for a kitchen where the Tiomos line is already in play elsewhere. For a corner build where the install team wants a tool-free clip engagement on the arm rather than a screw-on, a snap-on Tiomos variant is the alternative to consider.

Common Questions

Corner Geometry Done Right

When a pie-cut corner cabinet needs a self-close hinge that holds its position and closes reliably, this Tiomos screw-on hinge provides the 65 degree geometry and the solid mount that corner work demands.