Rev-A-Shelf 4WCTM 12" Maple 1-50 Quart Top-Mount Waste Pullout with Silver Bin and Soft-Close Slides, 4WCTM-1550BBSCDM-1

Maple Top-Mount Waste Pullout for a 12-Inch Face-Frame Cabinet

This Rev-A-Shelf 4WCTM pullout puts a 50 quart silver waste bin behind a base cabinet door on a maple top-mount carriage, pulling straight out on full-extension soft-close slides when the door opens.

Key Features

• 50 quart silver bin included gives a single-cabinet trash station generous capacity for a busy kitchen.
• Maple top-mount carriage mounts above the bin for a clean, open-top design that makes lifting and swapping the bin easy.
• Soft-close, full-extension slides bring the bin fully out of the cabinet and close it gently without slamming.
• Door-mount compatible so the bin rolls out in tandem with the cabinet door rather than requiring a separate pull.
• 150 pound weight capacity handles a loaded bin plus the carriage without strain on the slide system.
• Face-frame cabinet fit with a minimum opening of 12 inches wide, 22-1/4 inches tall, and 23-1/4 inches deep.

Making a Single Base Cabinet Do One Job Well

A top-mount carriage positions the hardware above the bin rather than below it, which keeps the bin mouth fully open and makes bag changes straightforward. Pull the door and the bin travels with it on full-extension slides, so the entire 50 quart bin comes out of the cabinet, not just partway. There is no reaching in or repositioning to get at the contents. The door-mount connection means the motion is one action, not two, which is the practical advantage in a kitchen where hands are often occupied.

Maple Carriage, Silver Bin, and Controlled Motion

The carriage is maple, a material that pairs naturally with the interior of painted or stained face-frame cabinetry, and one that holds mounting hardware securely through repeated daily use. The 50 quart bin is silver, a neutral finish that reads cleanly against the maple frame and coordinates with other cabinet interiors. Soft-close slides govern both directions of travel: the bin extends smoothly and returns under controlled damping, so there is no bang at the end of the stroke even when the cabinet door is pushed closed quickly. The 150 pound weight capacity keeps the system stable under real working conditions.

Who This Fits and Where It Works

This pullout is sized for a 12-inch wide face-frame base cabinet, one of the narrower openings in a standard kitchen run. That makes it a good fit in a kitchen where trash is tucked into a dedicated single-door cabinet beside the sink or under a prep area, rather than sharing space with a second bin. It suits a homeowner remodeling a kitchen with face-frame cabinetry, a cabinet shop building out a kitchen spec, or a contractor finishing an install and sourcing a hardware complement to match an existing Rev-A-Shelf system. The 4WCTM series also spans wider double-bin configurations, so the system can grow if an adjacent cabinet is available for recycling.

Common Questions

One Cabinet, One Bin, No Wasted Motion

This pullout turns a narrow 12-inch face-frame cabinet into a contained, smooth-operating trash station with a 50 quart bin and soft-close slides that handle daily use without complaint.