Rev-A-Shelf 4WCTM 12" Maple 2-27 Quart Top-Mount Waste Pullout with Silver Bins and Soft-Close Slides, 4WCTM-15BBSCDM2

Maple Top-Mount Waste Pullout for a Narrow Face-Frame Base Cabinet

This Rev-A-Shelf 4WCTM pullout drops two covered silver bins into a 12-inch face-frame base cabinet and rolls both forward for trash and recycling access, with soft-close slides to bring the unit back under control.

Key Features

• Two 27-quart silver bins separate trash and recycling in a single cabinet opening.
• Top-mount maple carriage suspends the bins from above, keeping the cabinet floor clear.
• Soft-close, full-extension slides pull both bins completely out of the cabinet and ease them quietly back in.
• Designed for 12-inch face-frame cabinets with minimum opening dimensions of 12 inches wide, 18-1/4 inches tall, and 23-1/4 inches deep.
• Door-mount compatible so the carriage rolls out when the cabinet door opens.
• 150-pound weight capacity across the two-bin system.

Two Bins, One Narrow Cabinet

Getting trash and recycling into the same base cabinet is a common layout challenge, especially when the only available cabinet is 12 inches wide. This pullout solves it by stacking two 27-quart bins side by side on a top-mount carriage sized for that exact opening. Both bins roll forward together on one pull, so the full capacity is accessible without reaching into the back of the cabinet or lifting a heavy bin out by hand. When connected to the door, the bins come forward the moment the door opens, which makes sorting routine and keeps the kitchen floor clear of freestanding containers.

Maple Carriage, Silver Bins, Controlled Motion

The carriage is maple, a natural-finish wood that blends into cabinet interiors and holds up to the daily cycle of loading and emptying. The two silver bins drop into and lift out of the carriage for cleaning or replacement without tools. Full-extension slides bring the entire bin set out of the cabinet so neither bin is blocked by the other, and the soft-close mechanism takes over at the end of the return stroke, absorbing momentum so the unit closes without rattling or slamming. With a 150-pound weight capacity across the system, both bins can be filled before the carriage feels the load.

Where This Pullout Fits

This unit is built for face-frame cabinetry and requires a minimum opening of 12 inches wide, 18-1/4 inches tall, and 23-1/4 inches deep. It belongs in kitchens where a single 12-inch base cabinet is the designated waste station, in a bath or utility room where two small bins cover different disposal needs, or in a renovation where a designer is specifying a clean, concealed waste solution for a tight run of cabinetry. Cabinet shops building face-frame kitchens will find this a straightforward spec for a standard narrow base. Bins and lids are included. A door-mount kit is required to connect the carriage to the door and is sold separately.

Frequently Asked Questions

Clean Concealment for a Tight Cabinet Run

This 4WCTM pullout puts two-bin waste sorting behind a single 12-inch door, on a maple top-mount carriage with soft-close slides, so the kitchen stays clear and the waste stays out of sight.