Senco 15 Gauge x 1-1/2 in Long Angled Finishing Brad Nail Chisel Tip, 4000/Box - DA17EPBN

Senco 15 Gauge Angled Finishing Brad Nail Uses

Senco 15 Gauge Angled Finishing Brad Nail is a 1-1/2 inch long finishing brad with a chisel tip, designed for detailed finish work where a 15 gauge fastener is specified. The 34 degree angled design works with Senco and Porter Cable angled finish tools, so fastener alignment follows the nose of the tool into tight trim and cabinet spaces. The 15 gauge size provides a substantial shank compared to lighter brads, which supports solid holding power in finish carpentry. The chisel tip style helps the nail track with the grain in many common trim and cabinet materials, which supports cleaner entry. The box quantity of 4000 nails supports larger jobs and repeated setups, so installers can run extended fastening runs on vanities, moldings, joints, and panels without frequent fastener resupply.

Finish Nail Details That Support Finish Work

• The 15 gauge classification defines a thicker shank than smaller brads, which supports firm fastening in vanities, cabinet door frames, and drawer assembly where joints see regular use.
• The 1-1/2 inch length provides a balance between penetration and control, which suits molding and trim, dowels and joints, and picture frames where blow-through would damage finished faces.
• The 34 degree angled form matches compatible angled finish tools, which helps reach scribe moldings, carvings, and ornamentals in confined cabinet and furniture locations.
• The chisel tip structure guides the nail point into the workpiece, which supports consistent seating on furniture repair and rattan work where misdirected points could split slender parts.
• The 4000 per box quantity offers a high count of fasteners, which supports extended production runs on blind pinning of upholstered and trim panels without intermittent fastener changes.

Angled Finish Nail Fit And Tool Matching

This 34 degree angled finish nail is specified for use in Senco Finish Pro 41XP, Finish Pro 35, SFN30, SFN40, and SNI tools, so installers using these tools can match fastener design to gun geometry. It also fits Porter Cable DA250B and similar models, which allows crews running that platform to keep a single 15 gauge, 1-1/2 inch angled nail on hand for multiple applications. The Senco DA17EPBN designation identifies this specific combination of gauge, angle, and length, which simplifies fastener selection when matching job submittals or shop standards. By using the listed tools with the stated nail configuration, nose orientation, magazine angle, and fastener collation work together, so driving and hole location track predictably across trim, cabinet components, and panels.

Using These Senco Nails In Woodworking Jobs

Where This 15 Gauge Angled Nail Performs

This Senco DA17EPBN 15 gauge, 1-1/2 inch angled finishing brad nail is described for vanities, so it can be applied where cabinet boxes and face frames need a discreet mechanical fastener. The same nail is specified for molding and trim, which covers base, casings, and light crown where a 15 gauge profile is appropriate. Applications also list dowels and joints, cabinet door frames, and drawer assembly, so one fastener can support multiple cabinet and furniture joints on a single project. Picture frames and scribe moldings are named uses, which highlights the role of the chisel tip and angled approach in fine framing and wall scribe work. Furniture repair, carvings, ornamentals, blind pinning of upholstered and trim panels, and rattan are also listed applications, showing that the nail is suited to delicate, detailed assemblies where visible fasteners need to remain minimal while still giving mechanical hold.

Why The Verified Details Matter On Site

The 15 gauge rating on this Senco finishing brad nail means the shank is sized for structural support in trim and cabinet joints, so door frames, drawers, and vanities gain consistent fastening across repeated shots. The 1-1/2 inch length limits over-penetration through thin moldings, panels, and picture frame stock, so visible faces remain clean while still reaching into backing material. The 34 degree angle aligns with Senco Finish Pro 41XP, Finish Pro 35, SFN30, SFN40, SNI, and Porter Cable DA250B tools, so the magazine and driver path present the nail at the correct angle into moldings, carvings, and ornamentals along walls and cabinets. The chisel tip helps the nail enter dowels, joints, and rattan elements with controlled tracking, so fragile decorative or repair pieces accept fasteners more predictably. With applications spanning blind pinning of upholstered and trim panels, the combination of gauge and length supports panel retention while keeping the head profile appropriate for concealed or low-visibility fastening in millwork and furniture work.

Common Questions About Senco DA17EPBN Finish Nails

Choose This Senco Nail For Targeted Finish Jobs

Senco 15 Gauge x 1-1/2 in Long Angled Finishing Brad Nail Chisel Tip, 4000/Box - DA17EPBN gives a defined set of uses covering vanities, trim, cabinet door frames, drawers, panels, and furniture work. The 34 degree angle, 15 gauge shank, 1-1/2 inch length, and chisel tip are matched to Senco and Porter Cable nailers listed for this part number, so the fastener geometry supports consistent fastening where cabinetry, millwork, and furniture repair demand controlled, angled driving.