Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 150 Grit Sanding Sheet is a 93mm, 6-hole aluminum oxide abrasive sheet designed for wood-finishing applications, so it targets the surface prep stages that matter on cabinetry, millwork, and trim. The 150 grit rating positions this sheet squarely in the fine-sanding range, which suits intermediate and pre-finish passes where grain must be refined without cutting too aggressively. Because the abrasive is engineered for all wood-finishing applications, it supports a consistent workflow from raw stock through final prep. Rubin 2 is designed with a 30% faster removal rate, so each pass takes off material more efficiently, helping installers and shop crews move through sanding steps with fewer repeated strokes. The design also delivers up to 30% longer sheet life, so fewer sheet changes interrupt work, which keeps sanding runs steadier on doors, components, and built-ins.
Rubin 2 is designed for rapid grit progression from 80 to 220, so 150 grit fits naturally as a mid-to-fine step in a structured sanding sequence. Because the abrasive is tuned for wood-finishing applications, it focuses performance where raw and primed wood need refinement rather than metal or composite cutting. The 150 grit stage smooths fibers left by coarser passes, which shortens the time needed to reach a surface ready for higher grits or finish. With the abrasive shedding wood fibers to limit clogging, each sheet maintains its cutting action longer in this range, so a consistent scratch profile is carried across wide runs of parts. That consistency matters when doors, drawer fronts, and panels must match under stain or clear finishes, reducing the chance of telegraphed swirl or uneven sheen.
This 93mm 150 grit Rubin 2 sheet fits tasks that demand control on smaller surfaces, such as rails, stiles, and narrow moldings used in cabinetry and interior woodwork. The combination of 93mm size and 6-hole pattern matches compact sanders designed for detail work, so technicians can keep the pad on profile while still benefiting from dust extraction. Because the sheet is intended for all wood-finishing applications, it serves on softwoods and hardwoods across built-ins, casework, and trim assemblies. At 150 grit, it sits at a point where grain definition is refined but still receptive to further sanding toward 220, allowing a predictable step between aggressive leveling and final finish sanding on doors and panels. That balance supports production environments that standardize sanding steps on repeat parts.
Rubin 2 is designed to minimize time spent at each grit level, and its 30% faster removal rate translates into shorter dwell times on each surface, which supports higher throughput on runs of components. By shedding wood fibers and reducing clogging, the abrasive face stays active longer, so operators experience a more uniform cut from the beginning of the sheet life to near the end. The up to 30% longer sheet life reduces the frequency of sheet changes, which cuts small but cumulative pauses that slow assembly-line or bench workflows. Aluminum oxide on this Rubin 2 sheet maintains a sharp cutting interface against wood, lending itself to a consistent scratch pattern that reads predictably under stain or clear coats. The rapid progression design from 80 to 220 means 150 grit plays a defined role in that sequence, helping shops lock in a repeatable, documented sanding process.
The Festool Rubin 2 150 Grit Sanding Sheet is designed for all wood-finishing applications, so it is focused on sanding wood surfaces used in cabinetry, trim, and millwork.
The Rubin 2 design offers a 30 percent faster removal rate, so each sanding pass removes wood more efficiently, reducing time spent at each grit stage during surface preparation.
This sanding sheet is designed to shed wood fibers and limit clogging from pitch buildup, so the abrasive stays sharp longer and maintains a more consistent cut over its life.
Within Rubin 2s rapid progression from 80 to 220, 150 grit serves as a mid-to-fine step that refines the surface between initial leveling and final finish sanding.
The Rubin 2 sheet is designed for up to 30 percent longer life, so operators change sheets less often, helping keep production sanding runs more continuous on repetitive parts.
Festool part number 499166 identifies this specific Rubin 2 93mm P150 abrasive sheet, so reordering the same wood-finishing product is straightforward for future jobs.
The Festool Rubin 2 150 Grit Sanding Sheet, 93mm with a 6-hole aluminum oxide design, is built for all wood-finishing applications where repeatable surface prep matters. With a 30% faster removal rate, rapid grit progression from 80 to 220, and up to 30% longer sheet life, this Rubin 2 abrasive supports efficient sanding sequences on cabinetry, trim, and millwork. Ordering this specific 499166 Rubin 2 93mm P150 sanding sheet through Wurth Baer Supply aligns your abrasives with a wood-focused system that keeps material removal, surface quality, and sheet longevity working together on every project.
Sold In: 1 Box