Berenson Jazz 11-5/16" (287 mm) Center to Center Brushed Nickel Pull, 9741-1BPN-C

Berenson Jazz Series Brushed Nickel Pull Use

Berenson Jazz Series brushed nickel pull is a zinc die cast handle designed for decorative cabinet applications, so it provides a consistent look for woodworking jobs that call for matching pulls across multiple doors or drawers. The 11-5/16 inch center to center drilling aligns with a common long-pull layout, which helps when laying out hardware on wider cabinet fronts or tall doors. Its brushed nickel finish controls visual sheen while still showing metal character, so it works well wherever a muted metallic look is wanted. The pull length of 13-1/8 inches gives you extended hand contact, which is helpful on heavier or full-height fronts. A 1-3/16 inch projection creates hand clearance from the face, supporting a solid grip without feeling bulky. The 1 inch width and 1 inch base dimensions keep the footprint compact, which matters when working near panel edges or narrow rails.

Key Jazz Series Pull Details For Projects

• The zinc die cast material forms a rigid pull body, which supports repeatable alignment when you are installing multiple handles along a run of cabinets or casework.
• The brushed nickel finish provides a defined metallic tone, helping the pull visually coordinate with other brushed nickel decorative hardware on the same project.
• The 11-5/16 inch center to center dimension sets your drilling pattern, so you can use this measurement to position holes accurately on doors and drawer fronts.
• The overall 13-1/8 inch length establishes the visible span of the handle, which helps you balance the pull visually on wide fronts or tall pantry and closet doors.
• The 1-3/16 inch projection sets the standoff from the cabinet face, giving fingers room to grab while keeping the handle close enough to avoid catching on nearby surfaces.
• The 1 inch width and 1 inch base dimensions define the footprint on the surface, which is useful when checking clearance near panel edges, profiles, or neighboring hardware.

Installation Dimensions For Jazz Series Pull

The 11-5/16 inch center to center drilling dimension on this Jazz Series pull defines exactly where mounting holes land, which simplifies layout when you are repeating the pattern across a bank of doors or drawers. The M4 screw size specification tells you the thread standard this pull is designed around, which matters when matching to existing pilot holes or when threading into inserts. With an overall length of 13-1/8 inches, the handle extends beyond the drilling points, so you can anticipate how far the pull reaches toward surrounding panels or adjacent doors. The 1-3/16 inch projection gives you a fixed distance off the face, which helps when checking for clearance with nearby walls, trim, or appliance fronts in tight installations.

Jazz Series Cabinet Pull Use In Woodworking

Where This Jazz Series Pull Works Best

This Berenson Jazz Series handle is a decorative hardware option for cabinets and similar casework where a longer pull is desired, because the 11-5/16 inch center to center spacing suits wide fronts and tall doors. The zinc die cast construction supports use on doors and drawers in typical woodworking environments, where a solid metal pull helps with frequent opening and closing. Its brushed nickel finish matches other brushed nickel hardware pieces, so it supports a coordinated look across kitchens, baths, or built-ins using the same finish family. The 1 inch base dimensions mean the pull contacts a compact area on the surface, which helps when working on rails or stiles with limited flat width. With a 13-1/8 inch overall length, the pull spans a substantial portion of the front, aligning well with designs that call for long, linear hardware.

Why These Pull Details Support Consistent Results

The defined 11-5/16 inch center to center measurement allows jigs or drilling templates to be set once, which supports consistent hardware placement across multiple units and reduces layout variation from cabinet to cabinet. Using the specified M4 screw size keeps fastening consistent with the pull design, which helps threads engage properly in standard holes or inserts sized for that metric thread. The 1-3/16 inch projection gives a predictable hand clearance, which supports comfortable gripping without having to adjust your front profiles around a deeper handle. The 1 inch width and matching 1 inch base dimensions keep the contact area tight, which can be helpful when aligning the pull on narrow frames or shaker-style rails. The combination of zinc die cast material and brushed nickel finish yields a uniform surface over the entire handle, which supports a clean, finished look when cabinets are viewed along a full run.

Common Questions About This Jazz Series Handle

Select This Jazz Pull For Defined Dimensions

This Berenson Jazz Series 9741-1BPN-C pull combines zinc die cast construction with a brushed nickel finish, so it delivers a consistent decorative hardware option for cabinetry. With its 11-5/16 inch center to center dimension, 13-1/8 inch overall length, and 1-3/16 inch projection, the handle provides clear drilling, span, and clearance values for layout. When a project calls for a long brushed nickel pull with defined measurements, this Jazz Series handle is suited to cabinet and casework installations built around those dimensions.