Berenson Jazz 8-7/8" (225 mm) Center to Center Brushed Nickel Pull, 9743-1BPN-C

Berenson Jazz Pull For Functional Cabinet Updates

Berenson Jazz Series brushed nickel pull is a zinc die cast handle designed for cabinet and furniture applications where a contemporary look and consistent sizing matter. The Jazz Series identity ties this pull to a coordinated decorative hardware family, which helps maintain a unified appearance across a job. Its brushed nickel finish diffuses light and reduces glare, which keeps the hardware visually calm on larger banks of doors and drawers. The pull is made from zinc die cast construction, which provides a solid feel in the hand while keeping weight manageable for standard cabinet fronts. A center to center dimension of 8-13/16 inches provides a long grip area that suits wider drawers and doors. Overall length of 10-1/2 inches visually balances larger fronts, creating a proportion that looks intentional on tall or broad faces.

Key Jazz Series Pull Details That Matter

• The zinc die cast material gives the pull a substantial feel, which helps doors and drawers operate with a confident hand grip on frequently used cabinets.
• The brushed nickel finish presents a muted metallic surface, which helps the pull blend with common appliance and hinge finishes on kitchen or bath projects.
• The 8-13/16 inch center to center dimension sets consistent drilling points, which simplifies layout when repeating this pull across multiple cabinet fronts.
• The 10-1/2 inch overall length spans more of the door or drawer face, which helps visually anchor larger fronts and aligns with modern linear design lines.
• The 1 inch width provides a broad contact surface, which improves grip comfort when pulling heavier drawers or tall pantry doors.
• The 1-3/16 inch projection stands the pull off the surface, which creates enough clearance for fingers to wrap behind the handle without interference.
• The 1 inch base dimensions define the footprint at each mounting point, which helps when verifying distance from panel edges, profiles, or adjacent components.

Mounting Dimensions For Straightforward Installation

The Jazz Series pull uses an 8-13/16 inch center to center measurement, which establishes precise hole spacing for drilling jigs or CNC programs. This exact spacing helps installers maintain straight, repeatable alignment across multiple doors and drawers. A length of 10-1/2 inches means the ends of the pull extend beyond the mounting holes, which allows some visual tolerance at the edges of the panel while the holes carry the structural load. The 1 inch base dimensions identify the footprint contacting the surface, which is useful when positioning the pull on narrow rails or shaker-style frames. A projection of 1-3/16 inches sets the standoff from the cabinet face, giving consistent finger clearance while keeping the handle close enough to avoid snagging on passing traffic. The specified screw size is M4, which matches common cabinet drilling practices that rely on metric threaded fasteners.

Using This 9743-1BPN-C Pull On Projects

Where This Berenson Jazz Pull Fits Best

The Berenson Jazz Series pull with 8-13/16 inch center to center spacing works well on wider cabinet drawers and doors where a longer grip is preferred. Its 10-1/2 inch length stretches across more of the front, which suits contemporary kitchens, baths, and built-ins that favor linear hardware. The 1 inch width and 1-3/16 inch projection give enough hand clearance for average fingers, which is helpful on heavier base cabinets or tall upper doors that see repeated use. Zinc die cast construction supports these applications by providing a sturdy feel whenever the door or drawer is operated. The brushed nickel finish coordinates with many brushed nickel hinges and faucets, which helps tie together visible hardware across a room. Within the Jazz Series collection, this pull can be paired visually with other Jazz components that share the same finish and design language.

Details That Support Repeatable Mounting Results

The defined 8-13/16 inch center to center dimension on this pull lets installers rely on fixed drilling templates, which speeds layout on large cabinet runs. Using a known center spacing also simplifies replacement of existing pulls that share the same measurement, because the new pull aligns to the original holes. The 1 inch base dimensions clearly identify the contact area on the door or drawer face, which helps position the pull without conflicting with panel edges or decorative profiles. A projection of 1-3/16 inches standardizes stand-off distance, so every installed pull offers the same finger room and visual depth, even when cabinets vary in size. The specified M4 screw size aligns with standard metric boring systems, which is useful in shops already set up for European-style cabinet construction. The combination of zinc die cast material and these precise measurements supports consistent hardware placement from cabinet to cabinet.

Common Questions About This Jazz Series Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Jazz Series 9743-1BPN-C brushed nickel pull combines zinc die cast construction, an 8-13/16 inch center to center dimension, and a 10-1/2 inch length to support consistent layout on wider cabinet fronts. Its 1 inch width, 1 inch base dimensions, and 1-3/16 inch projection define clear mounting and gripping geometry, which helps installations look aligned from cabinet to cabinet. For projects calling for brushed nickel decorative hardware with modern lines, this Jazz Series pull from Wurth Baer Supply provides a defined set of dimensions that translate directly into repeatable drilling, reliable hand clearance, and a coordinated finish across the job.