Berenson Jazz 8-7/8" (225 mm) Center to Center Polished Chrome Pull, 9744-1026-C

Berenson Jazz Series Pull For Cabinet Projects

Berenson Jazz Series pull gives you a polished chrome handle sized for larger cabinet doors and drawers, so you get consistent hardware on wider fronts. The pull is made from zinc die cast, which provides a solid metal body for dependable daily use. Its center to center dimension is 8-13/16 inches, so it aligns with drilling layouts designed around that spread. The overall length is 10-1/2 inches, which visually balances wider drawer fronts while keeping a clean, linear look. A projection of 1-3/16 inches creates finger clearance from the cabinet face, which helps with comfortable gripping. The pull width is 1 inch, giving a stable contact area against the door or drawer surface. Each base also measures 1 inch, which helps cover typical drill points and keeps pressure spread over a consistent footprint during use.

Key Jazz Series Pull Details For Projects

• The center to center measurement of 8-13/16 inches matches layouts built for that drill spacing, reducing rework when aligning holes across multiple cabinet fronts.
• The 10-1/2 inch overall length supplies a handle that looks proportionate on wider doors or drawers, supporting a symmetrical hardware layout across a run of cabinets.
• The 1-3/16 inch projection sets the handle out from the face, providing space for a full hand grip and reducing contact with finished cabinet surfaces during operation.
• The 1 inch width gives a comfortable edge profile to pull against, which helps when opening heavier drawers or tall pantry doors.
• The 1 inch base dimension at each end provides a consistent bearing surface on the cabinet, helping distribute load where the handle meets the door or drawer front.
• The polished chrome finish offers a bright, reflective look that ties in with other chrome elements, supporting a coordinated appearance across the space.

Mounting Dimensions That Support Clean Alignment

The Berenson Jazz Series pull uses an 8-13/16 inch center to center dimension, which supports straight-line alignment when drilling for multiple pulls on a cabinet bank. Its 10-1/2 inch total length means the handle extends just past the mounting holes at each end, giving a defined edge reference when lining it to door and drawer rails. A projection of 1-3/16 inches controls how far the handle stands away from the face, which affects both reach and clearance for surrounding doors. The 1 inch width and 1 inch base dimensions help position the pull evenly over the mounting points, creating a predictable layout across similar fronts.

How This Polished Chrome Pull Works In Use

Where The Berenson Jazz Series Pull Fits Best

This Berenson Jazz Series pull belongs in cabinet and furniture applications that match its 8-13/16 inch center to center spacing, so it suits layouts drilled for that specific distance. The 10-1/2 inch length lets it span a good portion of wider drawer fronts, which is useful on base cabinets where a longer grip is preferred. With a 1-3/16 inch projection, the pull stands off enough from the surface to allow fingers behind the bar, which benefits users on deeper drawers that need stronger pulls. The 1 inch base dimensions at each end help it sit neatly over standard mounting zones on face frames or frameless fronts, keeping the footprint defined without overwhelming narrower rails.

Why The Jazz Series Details Matter On The Job

The zinc die cast material gives this Jazz Series pull a solid metal construction, which matters when the handle is used repeatedly on doors and drawers in busy areas. Its polished chrome finish creates a smooth surface, helping hands slide over the pull comfortably as doors open and close. The center to center measurement of 8-13/16 inches is critical when replacing existing hardware drilled at that spacing, allowing straightforward swap outs without altering hole locations. The projection of 1-3/16 inches and 1 inch width work together to define the grip shape, influencing how the pull feels when opening heavier or taller fronts. The 1 inch base dimensions help keep mounting pressure localized but consistent, which supports a neat look when lined up across multiple cabinet faces.

Common Questions About This Jazz Series Pull

Selecting This Pull For Cabinet Installations

The Berenson Jazz Series pull in polished chrome, with its 8-13/16 inch center to center and 10-1/2 inch length, serves projects laid out for that wider spacing. Its zinc die cast construction, 1-3/16 inch projection, and 1 inch wide grip support regular door and drawer use. When a cabinet run calls for a polished chrome handle that matches these dimensions and mounting details, this pull offers a defined option for consistent hardware across the installation.