
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Core Series transparent orange pull gives you a 3-3/4 inch center to center handle that lines up with standard 96 mm drilling, so you can match existing layouts on cabinets or drawers without changing your boring pattern. The pull is made from acrylic, so the body stays rigid while keeping a lighter feel in hand, which suits both shop-built cabinets and residential casework. Its orange transparent finish lets surface color show through slightly, so the handle adds color without completely blocking the door or drawer face. The pull length of 4-15/16 inch covers the fastener span with some overhang at each end, which helps visually balance doors and drawer fronts that use 96 mm spacing. A projection of 9/16 inch keeps the grip shallow, which is useful when working around tight clearances or adjacent doors.
This Core Series pull uses a 3-3/4 inch center to center measurement, so drilling or boring for 96 mm spacing sets the mounting points for each handle. The specified M4 screw size defines the threaded interface in the pull, which guides fastener selection for through-bored cabinet doors and drawer fronts. With a 4-15/16 inch length and 1-5/16 inch width, the pull spans beyond the hole pair enough to cover slight layout variances while still looking centered on many standard fronts. The 9/16 inch projection keeps the handle closer to the surface plane, which matters when fronts operate near adjacent cabinetry, edges, or built-ins where extended hardware could catch. Together, these dimensions give a predictable footprint on the workpiece, helping maintain a consistent visual line across banks of cabinets.
The Core Series transparent orange pull fits cabinet and drawer layouts that use 3-3/4 inch (96 mm) center to center spacing, so it integrates with common boring patterns found in many shop jigs. Its 4-15/16 inch overall length suits doors and drawers where you want hardware that reads as present but not oversized, such as kitchen wall cabinets, bath vanities, or shop storage. The 1-5/16 inch width keeps the pull compact enough for narrower fronts while still giving a full-profile grip. The orange transparent acrylic look suits designs that call for a visible accent on face frames or frameless cabinet lines, and the material works well in decorative hardware roles where color is part of the design story.
The 96 mm center to center spacing allows repeatable drilling with standard metric cabinet hardware setups, which saves layout time when outfitting a full run of doors and drawers. Because the pull uses an M4 screw size, the threaded interface is defined, which supports consistent fastening across all fronts using the same bit and fastener style. The 9/16 inch projection keeps the handle from standing too far off the surface, which helps maintain clearance in tight galley runs or where doors open near tall panels. The 4-15/16 inch length and 1-5/16 inch width give a balanced footprint that covers the bore points cleanly, reducing the visual impact of minor drilling misalignment. With its acrylic construction, the pull presents as a single formed piece, which helps the handle sit flush against the cabinet surface when tightened.
The pull has a 3-3/4 inch (96 mm) center to center size, which sets the distance between mounting holes for use with standard cabinet drilling patterns.
The pull is made from acrylic, giving it a solid formed body that supports a smooth surface and the transparent orange appearance on cabinet doors and drawers.
The pull length is 4-15/16 inch, so it extends past the 3-3/4 inch mounting span to frame the screw locations and provide a clear gripping area.
The projection is 9/16 inch, keeping the pull relatively low-profile so it stays closer to the door or drawer face in tight or closely spaced installations.
The pull is 1-5/16 inch wide, giving a compact front profile that still offers enough surface for a comfortable hand grip on smaller cabinet fronts.
The pull uses an M4 screw size, which defines the thread engagement needed when mounting through cabinet doors or drawer fronts with standard hardware tooling.
The Berenson Core Series transparent orange pull combines 3-3/4 inch (96 mm) center to center spacing with a 4-15/16 inch overall length, giving a familiar drill pattern and balanced footprint on typical cabinet fronts. Its acrylic construction and orange transparent finish support projects where hardware color is part of the design. With a 9/16 inch projection and 1-5/16 inch width, the pull stays compact while still offering a defined hand hold on doors and drawers. For cabinet runs set up around 96 mm boring, this pull provides a clearly defined size, finish, and material choice to align with your layout and appearance targets.
Sold In: 1 Each