
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Static Series 160mm pull describes a Berenson Static Series handle with a 6-5/16 inch center to center mounting dimension, which sets consistent hole spacing for cabinet doors and drawers. The aluminum and glass material construction creates a rigid pull bar, helping the handle feel solid when operated on frequently used fronts. A polished chrome/white transparent finish provides a bright, contrasting look, supporting design schemes that call for a mix of metal shine and white detail across a run of cabinetry. The overall length of 6-7/8 inch gives hand room across the front, which helps when gripping with a full hand on wider drawers. A 1-1/4 inch projection sets the stand-off from the face, giving clearance for fingers between the pull and the cabinet surface. The width of 1-3/8 inch defines the front face size, which affects visual balance on doors and drawers.
The 6-5/16 inch center to center measurement defines the distance between mounting points, which sets the drilling pattern for doors and drawers using this pull. This dimension supports use on cabinets laid out to metric 160 mm spacing or the listed imperial size. The pull uses an M4 screw size interface, which aligns with common cabinet hardware threading and helps it seat correctly into standard drilled holes. A projection of 1-1/4 inch means the grip stands off the cabinet face, offering working clearance when pulling heavier drawers. The 5/8 inch base dimensions at each post show how much flat surface is needed for seating on the door or drawer front. Combined with the 1-3/8 inch width, these measurements outline the footprint that interacts with the cabinet material during installation.
The Static Series collection identity places this pull within Berenson decorative hardware aimed at cabinet doors and drawers, which suits kitchen, bath, or built-in cabinetry needing a coordinated look. Its 6-5/16 inch center to center layout targets fronts sized for a longer handle, which often matches wider drawers or taller doors where more hand span is useful. The polished chrome/white transparent finish pairs a reflective metal surface with a white element, which can support design plans that blend chrome fixtures with white cabinet finishes. With a 6-7/8 inch overall length, the pull visually anchors medium-width fronts without overpowering them, helping maintain proportion across a bank of cabinets. The aluminum and glass material combination supports use in decorative applications where a mix of metal structure and glass detail is desired.
The 160 mm (6-5/16 inch) center to center spacing gives installers a precise drilling reference, which helps maintain alignment across multiple doors and drawers in a run. Matching that spacing to existing 160 mm holes allows straightforward replacements where the old hardware shared the same drill pattern. The 1-1/4 inch projection provides an established stand-off that keeps fingers away from the cabinet face during operation, which can reduce contact with finished surfaces during frequent use. A 1-3/8 inch width sets a predictable gripping surface, contributing to a consistent feel from one cabinet front to the next. The 5/8 inch base dimensions at each mounting point help define how close the pull can sit to panel edges or profiles, supporting layout decisions on shaker, slab, or other door styles. Together, these dimensions and the M4 screw size form a defined interface that supports accurate installation and repeatable hardware placement in cabinetry work.
The Static Series 160mm pull suits cabinet doors and drawers drilled at 6-5/16 inch center to center spacing, aligning with fronts sized for a longer decorative handle.
The 6-5/16 inch center spacing defines a consistent drilling pattern, which supports straight alignment and simplifies replacing other pulls that share the same layout.
The polished chrome/white transparent finish provides a reflective chrome surface with a white detail, supporting cabinet designs that coordinate metal shine with white elements.
The 1-1/4 inch projection and 1-3/8 inch width shape the grip space and handle footprint, affecting hand clearance and visual balance on doors and drawers.
The M4 screw size matches a common cabinet hardware thread, which lets the pull fasten into standard bored holes used on many cabinet fronts.
The 5/8 inch base dimensions define the contact area at each post, guiding placement relative to panel edges and profiles during layout.
The Berenson Static Series 6-5/16 inch center to center polished chrome/white pull combines defined dimensions with an aluminum and glass construction, giving clear mounting data and a specific visual style. When cabinet layouts call for 160 mm spacing and a longer handle, its 6-7/8 inch length and 1-1/4 inch projection offer a consistent grip profile across doors and drawers. For projects aligning decorative hardware with polished chrome and white details, this pull provides a repeatable solution backed by precise measurements suitable for cabinet work.
Sold In: 1 Each