Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Static Series pull gives cabinet doors and drawers a defined 6-5/16 inch center to center layout, so drill points stay consistent across a run of fronts. The pull length of 6-7/8 inch provides balanced coverage on wider drawer faces, which helps align sightlines on banks of cabinetry. Its polished chrome and black transparent finish sets a clear contrast against both light and dark fronts, which supports layout visibility during install and adds a deliberate, modern look once in place. The aluminum and glass material combination keeps the piece in the decorative hardware category while maintaining a solid feel on the hand. A projection of 1-1/4 inch spaces the hand away from the cabinet face, which is useful where fronts sit near adjacent walls or tall panels. Base dimensions of 5/8 inch at each end create defined contact points on the surface.
The 160 mm, or 6-5/16 inch, center to center dimension on this pull sets a precise metric spacing that matches many cabinet drilling patterns, which is helpful on projects that reference European layout standards. Using the 5/8 inch base dimensions at each end, installers can position the pull so the bases sit fully on flat stiles or rails, supporting a clean bearing surface on painted, laminated, or veneered faces. The 1-1/4 inch projection works with standard cabinet door thicknesses by standing the hand clear of the edge, which can reduce knuckle contact on nearby surfaces. Width at 1-3/8 inch provides a defined gripping strip, which suits both narrow drawer fronts and taller doors that see frequent operation.
This Berenson Static Series pull, part number 9769-1000-P, fits cabinet work where a 160 mm center to center drilling pattern is already laid out or planned, so it integrates easily into existing jig setups. At 6-7/8 inch overall length, it works on medium and larger drawer fronts where a longer pull looks proportional and offers more reach across the face. The polished chrome and black transparent finish pairs well with modern flat-panel doors, framed cabinets with square edges, and installations where mixed metal tones appear in other room hardware. Its placement within the Decorative Hardware & Moldings Handles and Pulls category signals it is suited for visible cabinet faces in kitchens, baths, and built-in storage where appearance and consistent sizing matter together.
The 6-5/16 inch center to center spacing lets installers repeat the same measurement from job to job, which shortens layout time and simplifies replacing existing pulls that share this standard. With the 1-1/4 inch projection, the pull stands off the face enough to grasp from above or below, which can be useful on lower base cabinets and higher wall cabinets alike. The 1-3/8 inch width gives a stable gripping surface that is easy to center over stile widths commonly used in cabinet construction. Base dimensions of 5/8 inch define compact foot prints that sit fully on narrow rails, which helps avoid overhang on thin face frames. Aluminum and glass materials keep the pull light for handling while still reading as a substantial decorative component on installed cabinetry.
The Berenson Static Series pull has a 6-5/16 inch, or 160 mm, center to center distance, so drilling holes at that spacing positions the pull correctly on cabinet doors or drawers.
The Berenson 9769-1000-P pull is 6-7/8 inch long, giving extended coverage on the cabinet face, which can look proportional on medium and wider drawer fronts.
This pull has a 1-1/4 inch projection, which spaces the gripping area away from the cabinet surface and supports finger clearance near walls or adjacent doors.
The Static Series pull uses aluminum and glass, which delivers a modern decorative look while keeping the component light for handling during cabinet installation.
Each mounting base on this pull measures 5/8 inch, creating compact contact points that sit neatly on narrow rails and face-frame members.
The pull width is 1-3/8 inch, providing a defined grasp surface that suits frequent operation on doors and drawers in active cabinet areas.
The Berenson Static Series pull with 160 mm (6-5/16 inch) center to center spacing, 6-7/8 inch overall length, and 1-1/4 inch projection aligns well with cabinet work built around standard drilling patterns. Its polished chrome and black transparent finish, 1-3/8 inch width, and 5/8 inch base dimensions give installers a defined, repeatable footprint on doors and drawers. For projects that call for aluminum and glass decorative hardware in the Handles and Pulls family, this Berenson 9769-1000-P pull offers a consistent pattern that can be carried across an entire run of cabinetry.
Sold In: 1 Each
