Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Next Series transparent lime pull gives cabinets a bright acrylic handle that stands out visually while still fitting standard layouts, so it supports clean, consistent hardware lines across doors and drawers in the same run.
The Berenson Corporation design uses a 6-5/16 inch center to center spread, which matches common drilling patterns and lets this pull work as a direct layout match where that dimension is already planned into the cabinetry.
The acrylic material creates the lime transparent effect while keeping a solid pulling surface, so users get a noticeable color accent without changing the basic feel of a full-width handle in everyday opening and closing.
The pull length of 16-5/16 inches gives an extended grip region, which helps when aligning multiple fronts on larger cabinet faces where a longer line of hardware visually ties the run together.
A projection of 5/8 inch spaces the hand slightly off the cabinet face, which matters when planning reveals and door swing so the handle does not crowd adjacent components in tight installations.
A width of 6-5/16 inches and base dimensions of 11/16 inch define the footprint on the door or drawer front, which helps installers set accurate drilling positions and keep margins consistent from edge lines and panel details.
The 160 mm center to center measurement aligns with the 6-5/16 inch spread, which lets installers work in either metric or imperial units while keeping the same drilling layout for consistent pull positioning.
The M4 screw size specification defines the thread that matches this pull, which simplifies hardware selection on the job and helps keep fastener choice consistent when mounting across many fronts.
The 11/16 inch base size frames the contact area where the pull meets the cabinet face, which supports precise hole placement so the bases sit fully on flat material without overhanging panel details.
The 5/8 inch projection figure helps set expectations for clearance, which is useful when planning handle locations near interior rollouts or neighboring doors where small changes in stand-off can affect hand access.
The stated length of 16-5/16 inches establishes how much of the front the pull will visually occupy, which helps during layout to keep hardware proportionate on narrower or wider drawer fronts.
This Berenson Next Series pull belongs on cabinet doors and drawers that are drilled at 6-5/16 inch or 160 mm center to center, which ties directly into standard hardware spacing used in many kitchen and storage layouts.
The acrylic construction supports use on decorative fronts where a lime transparent effect is part of the design intent, which means it can serve both as a grip and as a consistent color element across multiple cabinets.
The extended 16-5/16 inch length works well on wider doors or drawers, where a longer pull helps visually span the panel and align with other horizontal lines in the cabinetry.
The 5/8 inch projection makes this pull suitable for fronts that benefit from a modest stand-off, which helps maintain a tight overall cabinet profile while still giving enough space for fingers behind the handle.
The 11/16 inch base dimensions allow the pull to sit comfortably on typical cabinet rail and stile widths, which keeps the contact area within flat sections of the face frame or slab without crowding decorative edges.
The lime transparent finish aligns with projects that call for a noticeable hardware accent, which allows designers and installers to repeat a single pull style as a unifying feature through different cabinet zones.
The precise 160 mm center to center distance lets installers set up jigs or templates around that single measurement, which speeds production drilling and reduces layout variation from cabinet to cabinet.
The 6-5/16 inch width measurement defines the main visual bar of the pull, which helps when spacing multiple pulls on tall pantry doors or large drawer stacks so sight lines remain even.
The M4 screw size spec ties this pull to a common machine thread standard, which supports predictable engagement into the hardware and consistent torque feel as each handle is secured.
The 5/8 inch projection ensures the grip stands off just enough from the cabinet face, which reduces the likelihood of knuckles brushing the door while still keeping the handle close for a streamlined appearance.
The 11/16 inch base size gives a clear rectangle for marking hole centers, which helps keep the pull square during installation and maintains straight lines when hardware is repeated across a full wall of cabinets.
The acrylic lime transparent finish is defined as part of the pull, which means the color and clarity are integral to the piece and can be counted on as a repeating design element wherever this model is used.
The Next Series transparent lime pull has a 6-5/16 inch, or 160 mm, center to center size, which matches standard drilling patterns for many cabinet layouts.
The Next Series transparent lime pull is made from acrylic, which provides the lime transparent appearance while forming a solid, continuous grip surface.
The Berenson acrylic cabinet pull projects 5/8 inch from the cabinet face, which defines hand clearance and supports a relatively low-profile installation.
This pull has a length of 16-5/16 inches and a width of 6-5/16 inches, which helps plan its visual proportion on doors and drawers.
This cabinet pull uses M4 screws, which sets the thread standard for the fasteners used to secure it through the cabinet fronts.
The base dimensions are 11/16 inch, which defines the contact area against the cabinet surface and helps guide drilling locations.
The Next Series transparent lime pull combines a 6-5/16 inch, or 160 mm, center to center layout with acrylic construction, giving installers a defined drilling pattern and a consistent lime transparent finish to repeat across cabinet doors and drawers.
The 16-5/16 inch length, 5/8 inch projection, and 11/16 inch base dimensions provide clear sizing for layout and mounting, so this Berenson Corporation pull can be specified wherever that footprint and color statement match the project plan.
Sold In: 1 Each
