Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Next Series 160mm pull provides a modern handle solution using a transparent orange acrylic body, giving cabinets a defined grab point that stands out visually on doors and drawers. The pull uses a 6-5/16 inch center to center mounting dimension, so hole spacing follows a known standard for layout across multiple fronts. Its overall length of 16-5/16 inches stretches past the mounting points, offering a long hand contact area that supports consistent opening along wider drawer fronts. The 5/8 inch projection sets the grip depth off the face, positioning fingers away from the surface as the handle is used. A width of 6-5/16 inches across the handle profile defines how much space the pull occupies on the face, helping with alignment in tight layouts. The orange transparent finish lets the acrylic material show through while keeping a distinct color reference on the cabinet run.
This Berenson acrylic pull mounts through the cabinet face using a 6-5/16 inch center to center spacing, aligning with 160 mm hole layouts on doors or drawers. The specified M4 screw size interface links the handle to standard metric threaded inserts or drilled holes sized for that thread. With a 5/8 inch projection, the handle stands off the surface enough that, once mounted, the user can wrap fingers behind the bar without contacting the door or drawer face. The 11/16 inch base dimension at each mounting point defines how the pull seats against the surface, giving a clear area to mark when positioning the handle on rails or stiles.
The Berenson Next Series pull is identified as decorative hardware in the handles and pulls class, positioning it for cabinet doors and drawers that call for a visible handle. Its transparent orange finish brings a defined color accent that stands out on neutral cabinet faces, which can help visually break long runs of doors. With a 6-5/16 inch center to center layout, the pull aligns with 160 mm drilling patterns often used on modern cabinetry, supporting consistent placement across banks of drawers. The 16-5/16 inch length provides a long visual line on the front, which helps tie together wider fronts or tall doors. As an acrylic pull, it maintains a clear, uniform profile along its length, so each installed piece presents the same look across a project.
The 6-5/16 inch center to center measurement anchors drilling locations, letting installers repeat hole spacing so all pulls line up horizontally or vertically on cabinet runs. The 11/16 inch base dimension at each end defines how much flat rail or stile width is needed for the pull to fully seat against the surface. The 5/8 inch projection positions the gripping bar at a set distance from the face, so every door offers similar finger clearance during operation. The 6-5/16 inch width gives a reference for how much horizontal space the handle occupies, guiding decisions on where to place it relative to panel edges or neighboring hardware. Combined with the 16-5/16 inch overall length, these dimensions create a repeatable pattern that supports neat, aligned handle layouts in kitchens, baths, or built-ins using this Berenson pull.
The Berenson Next Series 160mm pull has a 6-5/16 inch center to center measurement, so drilling for the mounting holes follows the 160 mm spacing pattern.
The pull is made from acrylic with an orange transparent finish, giving a clear material body with a defined orange color on the cabinet face.
The Berenson Next Series 160mm pull projects 5/8 inch from the surface, setting a consistent gap for finger clearance behind the handle.
The 9791-7000-P pull has an overall length of 16-5/16 inches, so it spans beyond the mounting points to create an extended grasp area.
The Berenson Next Series 160mm pull is specified for M4 screw size, matching common metric cabinet mounting threads.
This pull is part of the Berenson Next Series in the handles and pulls decorative hardware class, aligning it with cabinet door and drawer applications.
The Berenson Next Series 160mm pull combines acrylic construction, a transparent orange finish, and a 6-5/16 inch center to center layout, giving installers a defined drilling pattern and a distinct visual line on cabinet fronts. Its 16-5/16 inch overall length, 5/8 inch projection, and 11/16 inch base dimension provide known reference points for positioning on rails, stiles, and drawer faces. For projects calling for a colored, transparent handle in the decorative handles and pulls category, this 9791-7000-P pull offers consistent dimensions that support aligned runs and repeatable cabinet hardware spacing.
Sold In: 1 Each
