Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Recess Series recessed pull is a cabinet handle designed around a 5-1/16 inch (128 mm) center to center dimension, which sets a standard drill pattern for consistent hole spacing on new or replacement cabinet fronts. The 7-1/16 inch overall length provides edge-to-edge grip area around that pattern, useful when aligning multiple pulls in a run of doors or drawers. Its recessed pull design keeps the working surface set in from the cabinet face, which helps create a streamlined front where nothing protrudes excessively into walkways. The pull is made from zinc die cast material, giving the installer a stable, uniform body that handles repeat installations the same way. A Satin Nickel finish defines the visible surface, so the pull presents a muted metallic look that coordinates with common nickel-plated hinges and other satin hardware in a run of cabinetry.
The 5-1/16 inch (128 mm) center to center measurement defines where mounting holes land, which matters when drilling new cabinet faces or aligning to existing 128 mm bores. The 5/8 inch projection controls how far the recessed pull sits away from the cabinet, affecting both clearance for fingers and how close fronts sit to adjacent surfaces. An 11/16 inch width provides a narrow band that can sit neatly on stiles or drawer rails without crowding neighboring edges. Together with the 7-1/16 inch length, these dimensions frame the pull as a good match where a standard 128 mm pattern is required but the overall handle still needs some spread for visual proportion along the cabinet front.
This pull belongs to the Recess Series, positioning it as a recessed-style option within Berenson Corporation decorative hardware. Its Satin Nickel finish allows it to sit alongside other satin nickel components in kitchens, bathrooms, or casework built with coordinated metal tones. With a 5-1/16 inch (128 mm) center to center, the pull lines up with cabinet layouts that follow the 128 mm drilling standard, which is common in many handle programs. The 7-1/16 inch length offers additional visual presence across mid-size doors and drawers, which can help maintain balance when paired with other handles in the same collection. Because it is a recessed pull with a modest 5/8 inch projection, it supports cabinet runs where the goal is a clean face with minimal outward hardware profile.
The defined 5-1/16 inch (128 mm) center to center spacing assists in consistent jig setup, since installers can rely on a known distance between mounting points for repetitive drilling. The M4 screw size noted for the pull identifies the thread interface, which matters when selecting drill pilot size and threading into typical cabinet door or drawer materials. Zinc die cast construction delivers a solid, repeatable casting, which supports accurate seating against the cabinet face at each M4 fastener location. The 5/8 inch projection works with the recessed form to keep pulls from extending too far into traffic paths, which is useful on tight galley runs or narrow corridors. An 11/16 inch width helps the pull sit flat on face frames or full-overlay panels without overwhelming narrow rails, which can help maintain straight sightlines when pulls are aligned across multiple units.
The Berenson Recess Series recessed pull uses a 5-1/16 inch (128 mm) center to center size, which aligns with standard 128 mm drilling patterns on many cabinet doors and drawers.
The recessed pull has a 7-1/16 inch overall length, 11/16 inch width, and 5/8 inch projection, giving it a low-profile footprint on the cabinet face while spanning beyond the 128 mm mounting points.
The pull is made from zinc die cast material, providing a solid, uniform body that supports consistent mounting and a smooth surface for the Satin Nickel finish.
The 9796-1015-B recessed pull has a Satin Nickel finish, which delivers a muted metallic look that coordinates with other Satin Nickel cabinet hardware.
This Berenson recessed pull is specified with an M4 screw size, guiding the matching thread selection and pilot hole sizing during cabinet installation work.
The Recess Series designation identifies this pull as part of Berenson's Recess collection, indicating a recessed-style design within their decorative handles and pulls lineup.
This Satin Nickel recessed pull from Berenson Corporation combines a 5-1/16 inch (128 mm) center to center layout with a 7-1/16 inch length, 11/16 inch width, and 5/8 inch projection to support standard cabinet drilling patterns. The zinc die cast construction and defined M4 screw size give clear mounting parameters for cabinet doors and drawers. When a project calls for a recessed-style handle in Satin Nickel that aligns with a 128 mm pattern, this Recess Series part number 9796-1015-B offers a consistent, specification-driven choice for decorative hardware runs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BQ9794-1BPN-P Mfr# 9794-1BPN-P | Berenson Recess Recessed Pull 7-15/16" (202 mm) Center to Center, Brushed Nickel, 9794-1BPN-P |
