Screw-On Plinth Clip Black is a Titus Tool component designed for cabinet and furniture leveler applications, so it supports toe kick or plinth panels where a reliable connection to adjustable legs is needed. The product is part of the Leg Levellers and Toe kicks class, which means it is intended to work in the area between the floor and the cabinet or work surface structure. The SAP description identifies this part as a 38.5mm CRS black plinth clip, so it provides a defined size reference for matching with compatible leveling legs or plinth profiles during layout. A load rating of 450 lb per leg means each supported leg position can carry substantial static load, which matters when supporting base cabinets, work surfaces, or tables that hold heavy materials or tools.
The web description states that the plinth clip can be adjusted from the inside cabinet with a standard slotted screw driver, so installers can work from the front interior rather than crouching at the toe space. This inside-cabinet adjustment path supports small corrections to the plinth or leg alignment after the cabinet is set, which is useful when dialing in final height along a run. Using a standard slotted screwdriver means the adjustment interface does not require specialty tools, so installers and maintenance personnel can perform height or tension tweaks using the same hand tools already on site.
This Titus Tool Screw-On Plinth Clip is specified for work surface and table projects as well as general cabinet furniture levelers, so it works in base cabinet runs, workstations, and similar plinth-supported assemblies. The Leg Levellers and Toe kicks classification ties the part directly to the hidden base structure, where adjustable legs carry the load and a vertical panel closes the gap to the floor. With a load rating of 450 lb per leg, this clip supports heavy-duty cabinet or table bases where static loads may be concentrated near machinery, supplies, or dense storage. The black finish works particularly well in installations where the plinth area is intended to disappear into shadow below the casework, giving more visual emphasis to door and drawer fronts or worktop materials.
The 450 lb per leg rating allows designers and installers to plan cabinet groupings with confidence that each leg location connected via this clip can bear substantial weight without overstressing the plinth connection. Being able to adjust from inside the cabinet with a standard slotted screw driver means final leveling can be carried out after doors, drawers, and tops are in place, helping align reveals and surface joints along the run. The 38.5mm CRS sizing gives a consistent interface dimension, which helps maintain repeatable spacing between the cabinet underside, leg hardware, and the plinth element from one unit to the next. Within the Cabinet/Furniture Levelers category, this predictable geometry supports modular layouts, since identical clips respond similarly under load and during adjustment across multiple cabinets or tables.
The Screw-On Plinth Clip, Black has a load rating of 450 lb per leg, so each leg position tied to this clip can carry substantial cabinet or work surface weight.
The plinth clip can be adjusted from inside the cabinet using a standard slotted screw driver, allowing fine tuning without working down at the toe space front.
The 38.5mm CRS description identifies a specific clip size reference, which helps match the plinth clip to suitable leg systems or plinth components in a cabinet base.
The Screw-On Plinth Clip, Black is listed under Work Surface & Tables and Cabinet/Furniture Levelers, so it is used at the base of cabinets, furniture, and workstations.
Inside-cabinet adjustment with a standard slotted screwdriver lets the installer refine level and alignment from the front interior after the cabinet is set in place.
The black plinth clip finish provides a dark appearance at the toe or plinth area, helping the base visually recess beneath cabinets and tables in many designs.
The Screw-On Plinth Clip, Black from Titus Tool combines a load rating of 450 lb per leg with inside-cabinet adjustment using a standard slotted screw driver, so it suits heavy cabinet or work surface bases where straightforward leveling access is important. The 38.5mm CRS size and classification under Work Surface & Tables and Cabinet/Furniture Levelers define its role in leg leveller and toe kick assemblies, supporting consistent plinth lines across multiple units. For projects built around robust leg-supported bases, this plinth clip offers a defined capacity, a clear dimensional reference, and an adjustment method aligned with everyday trade tools.
Sold In: 1 Box