Doellken PVC Edgebanding 15/16" x 0.020", 8160 Latitude North, 600', 8160AA 1520 1

Edgebanding 8160Z Latitude North For Clean Edges

Edgebanding 8160Z Latitude North .020 inch Thick x 15/16 inch Width is a PVC edge banding from Doellken Woodtape that covers and finishes exposed substrate edges, so cabinet and panel sides present a unified Latitude North look instead of raw core.

The .020 inch thickness creates a slim, work-friendly band that follows typical cabinet and casework edges without adding bulk, helping edges stay visually flush with matching Latitude North surfaces in routine shop work.

The 15/16 inch width is sized to cover standard 3/4 inch panels with a small trim margin, giving installers working room to flush-trim while still fully covering the panel edge for a consistent finished line along doors, drawer fronts, and casework sides.

The Tafisa L530 Latitude North Alto color match noted as Good ties this banding to that specific Tafisa Latitude North Alto surface, so projects using that decor can carry the same design across exposed edges for a more continuous appearance.

The manufacturer part number 8160AA-1520-1 uniquely identifies this exact Latitude North .020 inch by 15/16 inch Doellken Woodtape edgebanding, which helps shops align purchasing, inventory, and specification documents when repeating the same finish across jobs.

Key Latitude North Edgebanding Details In Use

• The .020 inch thick PVC construction provides a thin edge profile that follows typical cabinet edges closely, supporting straightforward trimming and a flat visual line along panels using the Latitude North finish.
• The 15/16 inch width gives coverage beyond a 3/4 inch panel edge, allowing a small overhang for trimming while still masking the core so edges read as part of the Latitude North face.
• The Tafisa L530 Latitude North Alto Good color match designation ties this banding to that decor, helping designers and builders keep the Alto pattern running cleanly over doors, end panels, and shelving edges.
• The Doellken Woodtape brand on this PVC edge banding signals a defined product line, which supports consistent sourcing when the same Latitude North appearance is specified across multiple cabinet or fixture runs.
• The description reference to 600 feet per roll indicates a roll format suited to shop production, giving casework operations extended continuous length for repeated runs of Tafisa Latitude North Alto-based components.

Latitude North Edgebanding Fit And Sizing Details

The .020 inch thickness on this Doellken Woodtape Latitude North edgebanding provides a modest profile that works well where installers want an edge that follows the plane of Tafisa L530 Latitude North Alto panels, reducing the visual step at the seam.

The 15/16 inch width is dimensioned to span past a standard 3/4 inch panel, supplying extra material at the front and back edges for trimming operations while maintaining coverage of the substrate, which supports a more precise finished line.

The SAP description reference 15/16X.020 EB, LATITUDE NORTH 600FT/RL ties sizing and format together, so production planners can match edge banding dimensions to panel thickness and run length requirements when laying out Latitude North Alto projects.

Using Latitude North Alto Match In Cabinet Work

Where Latitude North .020 Edgebanding Fits Best

This .020 inch thick x 15/16 inch wide Doellken Woodtape edge banding is sized for work around 3/4 inch panels that carry the Tafisa L530 Latitude North Alto decor, so case sides, doors, and fronts can share the same Latitude North tone at every exposed edge.

Applied to cabinet ends and shelving built with Tafisa Latitude North Alto, the Good color match supports a close relationship between the face and the edge, helping installers carry the Alto pattern around corners so transitions between planes stay visually connected.

The roll length described as 600 feet per roll supports shops that edge multiple components in the same Tafisa L530 Latitude North Alto finish, allowing repeated cabinet, closet, or fixture parts to draw from a single continuous supply of matching banding.

Because this product is part of the Doellken Woodtape edge banding class, it integrates into workflows that already use PVC edge banding for casework, so fabricators can slot the Latitude North Alto option into existing edge-processing stations when that decor is specified.

Why These Latitude North Details Help Repeat Work

The combination of .020 inch thickness and 15/16 inch width on this Latitude North banding creates a repeatable geometry for edge operations on 3/4 inch materials, so once machines are dialed in, shops can run multiple Tafisa L530 Latitude North Alto parts with consistent edges.

The Good color match to Tafisa L530 Latitude North Alto helps maintain a controlled visual relationship between panels and edges, which reduces the likelihood of noticeable shifts from face to edge when multiple cabinets or fixtures are installed together in one space.

The explicit 8160Z identification and manufacturer part number 8160AA-1520-1 let project documents call out this exact Latitude North edgebanding, supporting future reorders or additions where the same Tafisa L530 Latitude North Alto finish and edge profile must be repeated.

The SAP description linking 15/16X.020 EB and LATITUDE NORTH 600FT/RL provides clear shorthand for size, type, and roll length, so purchasing and production teams can coordinate material lists with panel layouts whenever Latitude North Alto-based designs are part of the scope.

Common Questions About Latitude North Edge Banding

Select Latitude North Edgebanding For Matched Runs

This Doellken Woodtape Edgebanding 8160Z Latitude North .020 inch Thick x 15/16 inch Width ties directly to Tafisa L530 Latitude North Alto with a Good color match, making it a practical choice when panel faces and edges must read as one coordinated surface.

The combination of PVC construction, .020 inch thickness, 15/16 inch width, and a 600 foot roll description lines up with typical cabinet and casework requirements, so shops planning Latitude North Alto projects can align edge banding supply, sizing, and finish with their panel work.