Edgebanding 8163, Latitude East .020" Thick x 15/16" Width

Edgebanding 8163 Latitude East For Clean Edges

Edgebanding 8163 Latitude East is a PVC edge banding designed to finish exposed edges on panels, so cabinet and furniture projects present a consistent Latitude East look from face to edge. The 15/16 inch width covers typical panel thickness with a bit of play, which helps installers trim back to a crisp line without risking the panel surface. The .020 inch thickness creates a low-profile edge, so doors and drawer fronts keep a slim appearance while still masking the core. This edge banding is supplied under the Doellken Woodtape brand, giving shops a defined product identity for repeat jobs and reorders. The material is described as Edgebanding & Surfacing | Edgebanding, PVC, so it integrates naturally into workflows built around PVC surfacing materials on casework and fronts where a coordinated finish is required.

Key Latitude East Edgebanding Job Advantages

• The 15/16 inch width spans common panel edges with a small margin, which simplifies trimming and reduces the need for extremely tight alignment during application on straight cabinet parts.
• The .020 inch thickness keeps the edge profile modest, which helps maintain clean door reveals and drawer gaps where thicker edges might crowd adjacent components.
• The product is classified as Edge Banding in the Edgebanding & Surfacing | Edgebanding, PVC category, so it fits standard PVC edgebanding processes used in cabinet and furniture shops.
• The Doellken Woodtape brand identification helps shops specify the same material again by name, supporting consistent results across repeat runs or future service work.
• The manufacturer part number 8163AA-1520-1 provides a precise reference, which reduces ordering errors when matching prior jobs or aligning with shop drawings.
• The SAP description 15/16X.020 EB, LATITUDE EAST 600FT/RL identifies this as a 600 foot roll, which supports longer production runs before changing material on the edgebander.

Edge Banding Size And Roll Details For Setup

The 15/16X.020 EB, LATITUDE EAST 600FT/RL SAP description states that this is a 15/16 inch wide, .020 inch thick edge banding in a 600 foot roll, giving operators enough length to set up edgebanding equipment and run multiple parts with the same material. The 15/16 inch dimension allows some overhang on typical panel edges, which supports trimming methods that rely on a slight excess to achieve a flush finish. The .020 inch thickness works as a relatively thin PVC layer, so knives and trimming stations on edgebanders can be dialed for light passes that still cleanly remove overhang. The 600 foot roll format keeps material changeovers less frequent on longer batches, which is useful when running coordinated Latitude East projects.

Using This Latitude East Edge Banding In Shop Work

Where Latitude East Edgebanding 8163 Is Applied

This product is identified as Edgebanding 8163, Latitude East .020 inch thick x 15/16 inch width, so it is intended for edging panel components where a Latitude East appearance is needed along the edge. The web description notes Color Match: Tafisa L533 Latitude East Alto - Good, which positions this PVC edge banding for use alongside Tafisa L533 Latitude East Alto board when a coordinated color relationship is desired on cabinets or furniture. Because it is classed under Edgebanding & Surfacing | Edgebanding, PVC, it aligns with casework, closet, or furniture parts that rely on PVC surfaces as part of the finished system. The Doellken Woodtape brand gives shops a traceable source for this specific look, which is useful when a project standard calls out brand and color reference together, especially on commercial or multi-unit work where the same Latitude East tone repeats across many components.

Why Dimensions And Color Match Matter In Use

The .020 inch thickness defined in the product name sets expectations for a relatively thin PVC edge, which helps maintain tight door clearances and drawer reveals where thicker edges might alter fit. The 15/16 inch width described in both the name and SAP description gives a small margin beyond a 3/4 inch style panel, so installers can work with comfortable overhang for trimming without exposing the core. The Color Match: Tafisa L533 Latitude East Alto - Good statement in the web description guides designers and shops toward this edge banding when they are working with that Tafisa board, supporting a visual relationship between faces and edges. The manufacturer part number 8163AA-1520-1 ties all of these attributes together into one reference, helping purchasing, engineering, and production communicate about the same Latitude East PVC edgeband without ambiguity.

Common Latitude East PVC Edgeband Questions

Selecting This Latitude East Edgeband For Projects

Edgebanding 8163 Latitude East brings together a 15/16 inch width, .020 inch thickness, and a Color Match: Tafisa L533 Latitude East Alto - Good note, giving shops a defined PVC edge option for Latitude East style jobs. The Doellken Woodtape brand and the 8163AA-1520-1 identifier provide a clear reference when specifying materials on drawings or reordering for follow-up work. For cabinet or furniture runs built around Tafisa L533 Latitude East Alto board, this edge banding keeps the Latitude East appearance extending across exposed edges in a controlled, repeatable way.