Edgebanding 3817U Dark Chocolate For Clean Edges

Edgebanding 3817U Dark Chocolate is a PVC edge banding from Doellken Woodtape that covers and finishes raw panel edges, so cabinet and furniture projects present a uniform, finished perimeter instead of exposed core material. The 1mm thickness creates a substantial edge profile that stands proud enough to match typical panel surfaces without feeling bulky in everyday use. The 15/16 inch width is sized to span standard panel thicknesses while giving installers a small trimming margin, which helps produce straight, flush edges after banding work. The dark chocolate color provides a deep, rich tone that visually ties in with matching dark surfaces, helping transitions at corners and seams look intentional rather than patched. This product is supplied with the Doellken Woodtape manufacturer part number 3817U-1540-1, so shops can align it with job specs and material schedules that reference this specific color and series.

Key Edge Banding Details For Woodworkers

• The PVC construction defines this as a synthetic edge banding, which supports consistent machining and trimming along cabinet and furniture runs where a predictable cutting feel helps keep workflow steady.
• The 1mm thick design sets a measurable edge layer, giving installers a clear reference when flush trimming or profiling the edge so finished lines stay even along doors, drawer fronts, and carcass panels.
• The 15/16 inch width provides coverage beyond nominal panel thickness, allowing a controlled amount of overhang that can be trimmed back to align with the face of casework components.
• The dark chocolate color tone allows fabricators to carry that shade from face material out to the edge, so visible sides, tops, and cabinet fronts maintain a coordinated appearance on completed work.
• The Doellken Woodtape branding connects this edge banding to a defined manufacturer line, which helps shops reorder the same material for repeat jobs where matching finish and dimensions matter.
• The part marking 3817U-1540-1 specifies the exact combination of series, color, thickness, and width, helping project managers call out the correct edge banding on cut lists and material pulls.

Edgebanding 3817U Installation And Fit Considerations

This edge banding is identified as PVC, which means it behaves as a thermoplastic during fabrication, supporting typical edgebanding equipment setups built around that material family. The 1mm thickness helps the banding track reliably through standard edgebanders and trimming stations, so operators can dial in pressure and feed settings to suit a defined edge mass rather than guessing at variable thickness. With a 15/16 inch width, installers have enough material to center the strip along common panel thicknesses and still retain slight overhang for trimming, which helps avoid exposed substrate at either face. The dark chocolate designation defines the visual target for installers checking color continuity around door and panel perimeters, aligning this edge with other dark elements on the job. The Doellken Woodtape product identity supports alignment with equipment presets and shop standards already built around this manufacturer's PVC edge materials.

Using Dark Chocolate Edge Banding On Projects

Where This PVC Edge Banding Fits Best

This product is classified as edge banding within the edgebanding and surfacing category, positioning it for use on cabinet, furniture, and similar panel-based woodworking projects where raw edges need to be concealed. The 15/16 inch width suits typical panel builds that start from sheet goods, giving shops a banding size that can serve cabinet sides, doors, tops, and shelving without switching widths mid-job. The 1mm thickness places it in a common range for PVC banding, making it a natural match for casework where a defined, moderate edge profile is preferred over ultra-thin tape. Its dark chocolate color aligns visually with dark-toned designs, so projects calling for deep brown or similar finishes can carry that tone consistently to the edge. The Doellken Woodtape brand connection supports use in professional woodworking environments that specify brand-based material lines for continuity across multiple projects.

Details That Support Repeatable Edge Results

The PVC material designation gives installers a known cutting and trimming behavior, which supports repeatable results when setting knives, scrapers, and fine-tuning trimming stations along production lines. The 1mm thickness offers a stable edge layer that resists flexing during machining, allowing operators to run trimming tools with controlled passes that leave a clean intersection between banding and panel face. The 15/16 inch width provides enough overhang on both sides of standard panels to accommodate slight alignment variation during application while still trimming back to a crisp finished edge. The dark chocolate color code within the 3817U series ties edge banding selection directly to finish scheduling, so the same visual tone can be carried across doors, drawer fronts, and exposed carcass edges. The precise manufacturer part number 3817U-1540-1 lets purchasing and production speak the same language when calling out this exact edging, reducing material mix-ups between similar colors or sizes.

Common Questions About 3817U Dark Chocolate Edging

Select Edgebanding 3817U Dark Chocolate For Jobs

Edgebanding 3817U Dark Chocolate brings together PVC construction, 1mm thickness, and 15/16 inch width to address edge finishing on panel-based projects that call for a deep brown tone. The defined Doellken Woodtape identity and specific part number 3817U-1540-1 support straightforward material selection when matching job specs or repeating a proven edge solution on future cabinet, furniture, or casework runs. Selecting this edge banding lets shops align color, size, and material type in one choice so production can move from panel prep to finished edges with a clearly specified product in place.