Edgebanding 8133, Umbrian Oak 1mm Thick x 15/16" Width

Edgebanding 8133 Umbrian Oak For Clean Cabinet Edges

Edgebanding 8133 Umbrian Oak is a Doellken Woodtape PVC edge banding with a 1mm thickness and 15/16 inch width, which covers typical panel edges while giving a finished look that aligns with standard cabinet construction. The Umbrian Oak design ties directly to the Cal Closets Umbrian Oak Lago color match, so visible edges follow the same visual line as the corresponding Cal Closets surface. As a PVC edge banding from Doellken Woodtape, this product is engineered specifically as an edge treatment, helping installers transition from raw board edge to a consistent Umbrian Oak face in one step. The 1mm thickness creates a defined edge profile that reads as substantial on doors, drawer fronts, and casework sides. The 15/16 inch width gives a small margin beyond most nominal 3/4 inch panels, which supports trimming back to a tight, flush finish on both faces.

Key Umbrian Oak Edge Banding Details

• The 1mm thick PVC construction creates a solid edge presence that helps hide minor edge imperfections and provides a consistent transition from face to edge during trimming and finishing passes.
• The 15/16 inch width gives coverage beyond standard 3/4 inch panel thickness, allowing extra material for precise trimming on both faces without exposing the core during final cleanup.
• The Umbrian Oak design is described as a color match to Cal Closets Umbrian Oak Lago - Close, so installed edges visually track that specific decor in closet or cabinet layouts.
• The Doellken Woodtape brand identifies a dedicated edge banding manufacturer, giving installers a product built for edgebanding applications rather than a general-purpose surfacing strip.
• The manufacturer part number 8133E5-B-1540-1 ties this roll to a specific Umbrian Oak 1mm x 15/16 inch configuration, helping shops repeat the same look across reorders and multiple jobs.
• The SAP description "15/16X1MM EB, UMBRIAN OAK 300FT/RL" specifies that this is an edge banding roll, which supports production runs where a continuous length reduces splice points along cabinet edges.

Installation Fit For 1mm x 15/16 Inch Edgeband

The 1mm thickness of this Doellken Woodtape PVC edge banding works with common edge banding equipment settings designed around 1mm material, so machines and hand trimmers follow a familiar setup. At 15/16 inch wide, the banding gives a small overhang beyond each face of typical 3/4 inch panels, letting installers trim flush without risking edge exposure. Because the product is defined as PVC edge banding, it is intended to bond to panel edges rather than faces, aligning with standard cabinet and closet construction methods. The color match to Cal Closets Umbrian Oak Lago supports projects where edge alignment with that specific decor is required across doors, drawer fronts, and vertical panels.

Using This Umbrian Oak Banding In Real Projects

Where Edgebanding 8133 Umbrian Oak Performs Best

This Doellken Woodtape PVC edge banding is positioned for jobs using Cal Closets Umbrian Oak Lago decor, because the web description identifies it as a color match. On closet systems or built-ins using that finish, the 1mm thick edge banding lets installers bring the same Umbrian Oak visual onto exposed board edges, so verticals, shelves, and fronts read as a single coordinated surface. The 15/16 inch width suits standard 3/4 inch panel work, providing just enough coverage to handle slight panel thickness variation common in sheet goods while still trimming cleanly. Since it is classified as edge banding within the Edgebanding & Surfacing category, it belongs in workflows where raw substrate is cut to size and then banded on all visible edges before final fitting.

Details That Support Consistent Edgebanding Results

The defined 1mm thickness helps operators dial in edge banders, trimmers, and scrapers using consistent settings across runs, which supports repeatable results on multiple cabinets or closet sections. The 15/16 inch width, identified in both the product name and SAP description, gives predictable overhang for trimming tools, reducing the chance of under-coverage on face edges. The manufacturer part number 8133E5-B-1540-1 specifically labels this Umbrian Oak configuration, so shops can align drawings, cut lists, and inventory around a single code, streamlining reorders for future phases. The color reference to Cal Closets Umbrian Oak Lago - Close means that, within Cal Closets systems using that laminate or surface, this banding helps carry the same tone and pattern across every exposed edge, supporting a uniform finished appearance on repeat installations.

Common Questions About This Umbrian Oak Edgeband

Select This Edgebanding 8133 Umbrian Oak With Confidence

Edgebanding 8133 Umbrian Oak from Doellken Woodtape combines a 1mm thickness, 15/16 inch width, and a stated color match to Cal Closets Umbrian Oak Lago - Close, giving cabinet and closet shops a defined option when they need coordinated Umbrian Oak edges. The PVC edge banding construction and clearly specified dimensions support straightforward setup on edge banders and trimmers across repeated projects. For work built around Cal Closets Umbrian Oak Lago decor, this part number 8133E5-B-1540-1 provides a consistent reference for aligning purchasing, production, and finishing on every job that calls for this Umbrian Oak look.