Concealed Euro Hinge For Full Overlay Doors With Dowel Mounting

This Pro Value Series concealed hinge hangs full overlay doors on frameless and face-frame cabinets, with a self-closing spring and a dowel-mount cup for fast, precise positioning in production and CNC environments.

Key Features

• Full overlay straight arm lets the door cover nearly the entire cabinet side, leaving only a narrow reveal.
• Self-close spring pulls the door shut automatically over the last few degrees of travel.
• Dowel-mount cup presses into pre-bored dowel holes for accurate, repeatable positioning without cup screws.
• 110 degree opening angle delivers standard everyday access on full overlay doors.
• Works on both frameless and face-frame cabinets, making it a single hinge across mixed cabinet types on a job.

Dowel Mounting for Production-Paced Installs

The defining feature of this hinge is its dowel-mount cup. Instead of driving cup screws, the cup carries pre-attached dowels that press directly into matching bored holes in the door. In a shop or on a CNC-prepared run, that means positioning is set by the bore, not by the installer's hand, and the door goes on faster and more consistently. The 35mm cup seats in the door, and the hinge arm connects to a base plate on the cabinet, which is ordered separately. Plates are brand-specific, so pair this hinge with a compatible plate in the same series.

Steel Build in a Nickel Finish

The hinge is plated steel in a nickel finish. The self-close spring draws the door shut once released within the closing range, so doors stay closed without a catch or magnet. For cabinets where a damped, cushioned close is needed instead of a spring pull, the soft-close version of this hinge is the right choice. This one closes firmly and reliably, which suits commercial casework and multi-unit residential builds where a quick, consistent close is what the job calls for.

Where It Fits Best

Cabinet shops running production lines will get the most from the dowel-mount design: boring is handled at the machine, and the hinge presses in cleanly. It fits frameless boxes just as well as face-frame cases, so the same part number covers both cabinet types on a mixed project. Standard doors in the 16 to 22mm range are the right match. For doors outside that window, a thick-door or thin-door hinge is the better fit. If the project spec calls for soft-close rather than self-close, confirm the motion type before ordering.

Common Questions

Consistent Results Across Every Door on the Run

When boring is handled at the machine, this dowel-mount hinge keeps the install moving, door after door, on frameless or face-frame work.