125 Degree Concealed Hinge for Full Overlay Doors With Extra Clearance

This Pro Value Series concealed hinge opens full overlay doors to 125 degrees, a wider-than-standard swing that gives added access and clearance on frameless and face-frame cabinets alike. It is a screw-on, self-close hinge with a straight arm and a 45mm boring pattern.

Key Features

• 125 degree opening angle swings the door wider than the standard 110 degrees, creating more interior access and clearance from adjacent doors or walls.
• Self-close spring pulls the door shut automatically once released within the last few degrees of travel.
• Full overlay, straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• Screw-on mounting fastens the hinge directly with wood screws, no tool-free press-in plate required.
• Works on frameless and face-frame cabinets for broad compatibility across cabinet types.
• Nickel finish on plated steel for a clean, consistent look in the cabinet interior.

Where the Extra Swing Earns Its Place

The 125 degree opening matters most in layouts where a standard 110 degree swing leaves the door in the way: an island with cabinets on both sides, a run where adjacent doors are close together, or a narrow corridor kitchen where a door that swings a bit further back means easier access to the full interior. Full overlay geometry keeps the look clean, with each door covering the cabinet side so the box itself stays hidden. The 35mm cup bores into the door, and the arm connects to a base plate on the cabinet, which is ordered separately. The base plate is brand-matched, so use a plate from this same series for a correct fit.

Build and Finish

The hinge body and arm are plated steel in a Nickel finish. The screw-on mounting means the plate anchors with standard wood screws into the cabinet side or stile, a straightforward connection that does not depend on pre-drilled 5mm system holes. That makes this hinge a practical choice for site-built cabinets, older boxes, and face-frame cabinets where system holes are not part of the construction. The self-close spring is integrated, so no add-on damper or catch is needed to bring the door shut.

Right Cabinet, Right Application

This hinge suits shops and contractors working through frameless production runs or face-frame installs where the wider door swing is a design requirement, not a nice-to-have. It also fits homeowners replacing worn hinges on a cabinet that originally had a wider-than-standard opening. Because the spring closes the door but does not cushion it, this hinge works well in utility spaces, pantries, and garage or laundry cabinets where a quiet close is less critical than reliable function. For a kitchen or bath where a damped, slam-free close is the goal, the soft-close version of this series is the right call instead.

Common Questions

Wider Access, Reliable Close, Ready for the Job

Choose this hinge when the layout calls for a full overlay door that swings further back, closes on its own, and mounts cleanly to either a frameless box or a face-frame cabinet.