Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nexis face frame adapter plate from Grass America is a 0mm height hinge mounting plate that ties Nexis hinges to face frame cabinetry, giving installers a consistent reference point when laying out hinge positions across a run of cabinets. The plate is part of the Nexis face frame adapter base plates family, so it is engineered to function as the hinge interface at the cabinet side, turning the frame into a reliable mounting surface for the hinge arm. As a 0mm height plate, it keeps the door-to-frame relationship at the factory-designed position, which helps maintain even reveals when you match it with hinge drilling patterns. The plate belongs to the hinge mounting plates product class, so it is intended to be a structural link between the cabinet side and the Nexis hinge, rather than a decorative trim part.
The Nexis face frame adapter plate is designed to attach directly to the cabinet side with #6 x 5/8 flat head screws, so it creates a fixed anchor point on the face frame side of the installation. Because it uses elongated screw holes that provide plus or minus 2mm of height adjustment, the plate can be shifted up or down relative to the screw shanks, allowing the hinge-and-door assembly to move in small increments along the frame. As a 0mm height hinge mounting plate, it positions the hinge at the base reference level, which keeps the door overlay or inset relationship tied to the original Nexis system geometry when the plate is properly located on the cabinet.
The Nexis face frame adapter plate serves as a hinge mounting plate on face frame cabinets where Grass America Nexis hinges are used, giving the hinge a dedicated base that is tailored to frame construction. By belonging to the hinge mounting plates category, it is meant to occupy the spot between the cabinet side and the hinge arm, so the door loads transfer through the die-cast steel body into the cabinet. The 0mm height specification means the plate sits at the base reference plane in the Nexis system, so it works in layouts where the hinge cup boring and frame position are planned around a zero-height plate. Because it uses #6 x 5/8 flat head screws driven into the cabinet side, it fits naturally into woodworking shops that standardize on that screw size and length for many hardware mounting tasks.
The die-cast steel construction of the Nexis face frame adapter plate provides a rigid bearing surface for the hinge arm, so door movement does not rely on a flexible or compressible base and alignment stays more consistent after the screws are driven. The clip on design that affixes the plate to the hinge lets installers seat the plate on the cabinet side first, then snap the compatible Nexis hinge arm on or off as needed during fitting and finishing steps, which streamlines door removal without disturbing the plate position. The elongated screw holes that provide plus or minus 2mm of height adjustment allow the plate to slide slightly relative to the #6 x 5/8 flat head screws, so final door position can be dialed in without redrilling. As a 0mm height hinge mounting plate, it locks the hinge arm into the Nexis reference level, so once the installer is familiar with that geometry, repeat jobs can be laid out using the same measurements.
The Nexis face frame adapter plate is a hinge mounting plate from Grass America, so it functions as the structural base that connects a Nexis hinge arm to the cabinet on face frame constructions.
The Nexis face frame adapter plate uses a clip on design to affix to the hinge, allowing the hinge arm to be attached or detached from the cabinet-mounted plate without loosening the mounting screws.
The Nexis face frame adapter plate offers plus or minus 2mm of height adjustment through its elongated screw holes, letting the plate move slightly relative to the screws to refine door alignment.
The Nexis face frame adapter plate has a 0mm height, so it locates the hinge arm at the base Nexis reference level, maintaining the designed door-to-frame relationship in layouts using zero-height plates.
The Nexis face frame adapter plate attaches to the cabinet side via #6 x 5/8 flat head screws, giving installers a straightforward mounting method that matches common cabinet hardware practices.
The Nexis face frame adapter plate is made of die-cast steel, so it provides a rigid mounting base that supports the hinge arm and helps maintain door alignment under normal cabinet use.
The Nexis face frame adapter plate from Grass America serves as a 0mm height hinge mounting plate that ties Nexis hinges to face frame cabinets, giving your installation a defined reference point on the cabinet side. Die-cast steel construction provides a sturdy base for the hinge arm, while elongated screw holes with plus or minus 2mm of height adjustment allow the mounted plate to shift slightly around the #6 x 5/8 flat head screws for fine tuning. For projects built around the Nexis system on face frame cabinetry, this adapter plate provides the dedicated hinge interface at the cabinet side.
Sold In: 3000 Each