Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 432 series filler pull-out converts a 9-inch base cabinet filler space into four shelves of working storage, extending fully on Blum soft-close ball-bearing slides and arriving in a natural maple finish ready to stain, paint, or seal to match the surrounding cabinetry.
A narrow filler gap next to a base cabinet run is easy to ignore, but a 9-inch opening is wide enough to hold four shelves of spices, oils, cleaning supplies, or dry goods. This pull-out fills that gap with organized, accessible storage rather than dead space. The full-extension design brings the rear shelf all the way forward, so nothing gets pushed to the back and forgotten. Because it mounts to the cabinet door, pulling the door open pulls the unit out with it, making one-handed access straightforward.
The 432 series builds from maple in a natural finish, which means the wood is prefinished but not stained or painted to a specific color. That makes it a practical starting point when the surrounding cabinetry has a distinctive stain, a custom paint color, or a finish that a pre-stained product would not match. The unit arrives ready for a finish coat without additional prep work. The Blum soft-close slides are the motion hardware here: ball-bearing construction supports smooth travel under load, and the soft-close mechanism absorbs the closing energy so the unit does not slam into the cabinet frame.
Cabinet shops and designers fitting out a custom kitchen often encounter filler gaps that standard pull-out widths do not address. This unit is sized for the 9-inch gap specifically, so it fits where a 12-inch or wider organizer cannot. It works equally well in a renovation where a homeowner wants to recover lost storage in an existing run, and in a new-construction kitchen where the filler has been planned as a functional storage column from the start. The prefinished maple construction suits both production finishing environments and finishing on-site after install.
It needs a minimum opening of 9 inches wide, 30 inches tall, and 23 inches deep. Measure the clear interior opening before ordering.
The unit arrives prefinished in a natural maple state. It is ready to accept stain, paint, or a clear topcoat to match surrounding cabinetry, with no additional surface prep required.
Yes. The unit is door-mount compatible, so it can be connected to the cabinet door and will extend when the door is opened.
Blum ball-bearing slides with a soft-close mechanism. They provide full extension and controlled, quiet closing under load.
This pull-out turns a narrow filler opening into four usable shelves finished in natural maple, ready for a custom stain or paint and built to close quietly every time on Blum soft-close slides.
Sold In: 1 Each
