Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 5149 series bottom mount waste pullout pairs an aluminum carriage with a 35 quart white bin and soft-close slides, turning a standard base cabinet into a contained, door-operated trash station.
A waste pullout does one thing well: it moves the trash bin from the floor or an open countertop spot into a base cabinet, where it stays covered, out of sight, and out of the way. The 5149 links to the cabinet door through a door-mount bracket so the act of opening the cabinet pulls the carriage forward automatically. The over-travel extension means the bin clears the cabinet face completely, making it easy to drop waste in or swap the liner without bending into the cabinet opening. For a kitchen where a single-bin setup handles everyday trash, this is the format that fits.
The carriage is aluminum, a finish that reads as utilitarian and workmanlike rather than decorative. It is the hardware that does the structural job: holding the bin, riding the slides, and taking the door load cycle after cycle. The bin is 35 quarts in white, a standard household capacity sized for the kind of daily use a kitchen or prep area generates. The soft-close mechanism handles the return, damping the carriage back into the cabinet so a heavy bin does not bang the back wall. The unit arrives as an assembled carriage with bin included. The door-mount bracket attaches the carriage to the cabinet door and is included in this configuration.
This pullout is sized for a base cabinet with a minimum opening of 12-1/4 inches wide, 20 inches tall, and 22 inches deep. It suits a kitchen base run, a prep station, or a utility cabinet where a single waste bin covers the daily load. Homeowners fitting out a new kitchen, cabinet shops building to spec, and contractors sourcing for an install will all find this a straightforward single-bin solution. If the project calls for two bins to separate trash and recycling, step up to a double-bin carriage in the same series. Replacement bins and lids are available separately when the time comes.
The cabinet needs a minimum clear opening of 12-1/4 inches wide, 20 inches tall, and 22 inches deep. Confirm all three dimensions before ordering.
Yes. This configuration includes the door-mount bracket so the carriage connects to the cabinet door and travels with it when the door opens.
Over-travel means the carriage extends past the point of standard full extension, so the bin projects beyond the cabinet face and is fully accessible without reaching inside.
Yes. Replacement bins and lids for the 5149 series are sold separately, so you can swap them out without replacing the whole unit.
Choose the 5149 aluminum waste pullout to put a covered 35 quart bin behind the cabinet door on soft-close, over-travel slides that bring it fully forward every time.
Sold In: 1 Each
