Rev-A-Shelf wo-Tier Blind Corner Units for 18" Opening and Soft-close Full extension Slides Chrome, Non-handed - 5707-18CR

Choose a Rev-A-Shelf blind corner organizer

Rev-A-Shelf blind corner organizer helps turn hard-to-reach cabinet space into usable storage with a two-tier blind corner system and chrome baskets. The Rev-A-Shelf 5707-18CR is a blind corner pull-out designed for cabinets with 15 inch and 18 inch openings, and this non-handed unit can be used in face frame and frameless cabinets. A chrome basket organizer layout with two large and two small baskets gives you room for mixed kitchen items, while soft-close slides and Rev-A-Motion soft-open and soft-close hardware help reduce abrupt door movement. For buyers comparing blind corner units from rev a shelf or revashelf, this model is built to improve access in spaces that are often difficult to use efficiently.

Gain easier access with blind corner pull-out storage

• Two-tier blind corner organizer design - The Rev-A-Shelf product helps use cabinet space that is often blocked by limited reach and awkward angles.
• Two large and two small chrome plated baskets - The basket mix supports storage of different item sizes without forcing everything into one basket format.
• Dynamic pivot sliding hardware - The blind corner pull-out mechanism helps move stored items into a more accessible position during use.
• Rev-A-Motion soft-open and soft-close technology - The hardware helps reduce hard closing and supports smoother cabinet door movement.
• Soft-close full extension slides - Full extension travel helps bring stored contents forward for better visibility and reach.
• Universal door mounting hardware included - Included mounting hardware helps simplify installation planning for the cabinet door connection.
• Door tilt adjustment screws included - Adjustment screws help fine-tune door alignment after installation.
• Non-handed configuration - The Rev-A-Shelf blind corner organizer is not limited to one handing direction, which can simplify selection for many layouts.
• Works in face frame and frameless cabinets - The organizer can be used across common cabinet constructions when the opening size matches product requirements.

Confirm blind corner units fit and included parts

Key specs to confirm: This Rev-A-Shelf blind corner organizer is identified as model RS5707-18CR and is described as a two-tier chrome unit with soft-close full extension slides. Verified fit information states it can be utilized in face frame and frameless cabinets with 15 inch and 18 inch openings. Before ordering, confirm your cabinet opening size, blind corner cabinet layout, door mounting setup, and the clearance needed for the pivot sliding hardware to operate correctly. If you need exact cabinet depth, width, height, or handing clearance details, confirm those in current manufacturer technical documents. Load rating, compliance details, and any safety-related specifications are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified included items are four baskets, universal door mounting hardware, and door tilt adjustment screws. The product is sold as each.

What to verify before ordering: Confirm that your cabinet is a blind corner application, that the opening is 15 inches or 18 inches as required, that your cabinet construction is face frame or frameless, and that your door and interior clearances will allow full extension and pivot movement.

Compare Rev-A-Shelf pullout use and fit

Use a blind corner pull-out where reach is limited

Blind corner cabinets often waste space because stored items sit behind the cabinet face where they are hard to see and harder to reach. A blind corner pull-out like the Rev-A-Shelf 5707-18CR is intended for buyers who want better access without rebuilding the cabinet box. Professional installers, cabinet shops, and serious DIY buyers often choose this type of organizer when a standard shelf leaves too much hidden storage at the back corner.

This Rev-A-Shelf pullout uses dynamic pivot sliding hardware, so the baskets move in a way that helps bring contents out from the blind area. That matters in everyday kitchen use because the problem is not just storage volume - it is access. When canned goods, containers, wraps, or small appliances end up deep in the corner, users either forget they are there or struggle to retrieve them. The two-tier arrangement and the mix of two large and two small chrome plated baskets help separate items by size and frequency of use.

The non-handed design can also help during planning because the product is not restricted to a single handing orientation in the product data. Buyers still need to confirm cabinet-specific clearance before purchase, especially if nearby hinges, door swing, interior obstacles, or shelf positions could interfere with travel. The product data verifies use in face frame and frameless cabinets with 15 inch and 18 inch openings, which gives a useful starting point for fit checks. If your project treats the cabinet more like a pantry pullout application, confirm that the blind corner geometry and opening dimensions still match this product type, because this is a blind corner organizer rather than a tall pantry unit.

For installers who want smoother operation, the soft-close slides and Rev-A-Motion soft-open and soft-close hardware are practical points. They help reduce abrupt movement and make the unit easier to use in active kitchens. Universal door mounting hardware and door tilt adjustment screws are included, which supports door attachment and final alignment after installation.

Compare chrome basket organizer details before you buy

When comparing a chrome basket organizer for a blind corner cabinet, the most useful differences are usually fit range, basket layout, slide type, door mounting method, and whether the unit works with face frame or frameless construction. This Rev-A-Shelf blind corner organizer gives verified details in each of those areas. It is a two-tier unit, includes four baskets, uses soft-close full extension slides, includes universal door mounting hardware, and can be utilized in both face frame and frameless cabinets within the stated opening sizes.

That kind of verified information helps buyers avoid common ordering mistakes. Some blind corner units may require a specific handing direction, a narrower use case, or different door connection parts. Here, the non-handed design and included door tilt adjustment screws are useful because they point to easier alignment and broader planning flexibility. The chrome basket format is also practical for buyers who want visible, open storage rather than enclosed trays.

For reliability and consistency, many buyers look first at whether the product description clearly states what is included and where it installs. Rev-A-Shelf provides those core details for this model. If your project depends on exact interior dimensions, load capacity, or a precise installation template, those details should be checked in manufacturer documentation before purchase. That is especially important in remodel work where cabinet openings may measure correctly at the front but still have interior obstructions that affect a blind corner pull-out during operation.

Ask fit questions before buying blind corner units

Order the right chrome basket organizer

RS5707-18CR is a Rev-A-Shelf blind corner organizer built for buyers who need better access, four included baskets, and soft-close operation in a blind corner cabinet. Before purchase, confirm that your cabinet is a face frame or frameless blind corner application with a 15 inch or 18 inch opening, and verify interior clearance for the pivot sliding hardware. Included universal door mounting hardware and door tilt adjustment screws help with installation planning, but exact fit should always be checked against current manufacturer documentation.