Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
120V LED metal puck light describes a compact, all metal LED fixture designed to run directly on 120 V, so it suits typical building power in shops and residential spaces without low-voltage components. The 1.5 watt load delivers focused lighting while managing energy use on multi-light runs. A warm white color temperature of 3,500K creates comfortable, neutral-toned illumination that works well over work surfaces or inside cabinets where color clarity matters. The 2.75 inch, or 70 mm, diameter keeps the footprint small, helping it fit in tight soffits or under shallow shelves without crowding hardware. A depth of 1.12 inch, or 29 mm, lets it sit close to the mounting surface, which keeps the profile low in visible installations. The dimmable design supports light level control, so the same puck can serve for bright task lighting or softer accent lighting as needed.
This LED dimmable metal puck light operates at 120 V, so it ties into standard line-voltage lighting layouts in residential or commercial millwork. With a 2.75 inch, or 70 mm, diameter, layout work centers around a compact footprint that suits typical under-cabinet depths. The 1.12 inch, or 29 mm, depth allows the body to sit close to the mounting surface, which helps keep the fixture discreet while still delivering usable light. The ability to link up to 30 lights simplifies wiring planning on continuous cabinet runs because multiple fixtures share a single feed path. Compatibility with a 10 foot power cord, sold separately, supports flexible placement relative to the nearest power point, useful when outlets or junction points are offset from the lighting line.
This 1.5 watt 120 V LED puck light fits well in under-cabinet, display, or overhead millwork where compact fixtures are preferred. The 2.75 inch diameter keeps it practical for cabinet bottoms and shelving, giving designers room to align multiple lights along a run. At 1.12 inch depth, the housing stays relatively low profile, so it works in shallow build-ups and decorative valances without pushing the face rail design. Warm white 3,500K output suits spaces where a comfortable, neutral tone is important, such as kitchen counters, office workstations, or retail shelving. The all metal fixture construction aligns with woodworkers and cabinet shops that expect solid hardware in visible locations. Line-voltage 120 V operation lets the puck integrate into standard electrical planning in the shop or jobsite.
The ability to link up to 30 lights allows installers to build continuous lighting across long cabinet banks, which helps maintain even spacing and uniform brightness from end to end. A 1.5 watt load per puck makes power calculations straightforward when planning runs, keeping total wattage within typical circuit limits on larger projects. The 30,000 hours bulb life rating reduces disruption over time, especially in installations with many fixtures where access for replacement would interrupt use of the area. Warm white 3,500K color temperature supports consistent appearance from one fixture to the next, important when these lights run side-by-side in sightlines under cabinets. Dimmable performance adds flexibility, allowing the same installation to operate as bright task lighting during work hours and softer accent lighting during low-activity periods. The all metal fixture housing provides a defined edge and appearance at each cutout, which helps completed cabinetry look finished and intentional around every light.
This LED dimmable metal puck light uses standard 120 V power, so it integrates into typical line-voltage lighting circuits in residential or commercial woodworking projects.
The 1.5 watt LED load focuses output for task or accent lighting, so it supports localized illumination while keeping power consumption low on multi-light installations.
This LED puck light produces warm white 3,500K light, which delivers a comfortable tone suited to kitchens, offices, and display cabinetry where neutral color rendering is important.
The LED puck light is rated for 30,000 hours of bulb life, which greatly reduces change-out frequency on installations with multiple fixtures in hard-to-reach areas.
This 120 V LED puck light can be linked in runs of up to 30 lights, supporting continuous lighting across extended cabinet or display runs with a unified appearance.
The LED puck housing measures 2.75 inches (70 mm) in diameter and 1.12 inches (29 mm) in depth, which suits typical under-cabinet and shelf applications.
This LED dimmable metal puck light from Hardware Concepts, Inc. combines 120 V operation, a 1.5 watt load, and warm white 3,500K output, making it a practical choice for under-cabinet or display lighting. The 2.75 inch diameter and 1.12 inch depth help it integrate into common cabinet and shelving layouts without reworking designs. With linkable capacity up to 30 lights and a 30,000 hours bulb life rating, it suits larger projects where consistent appearance and reduced maintenance matter. Select this 5.12006-078 model when you need a compact, all metal LED puck that fits standard line-voltage planning.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  PL513000-010 Mfr# 5.13000-010 | LED Line Voltage Pucks Power Cords - Hardware Concepts, Inc. 5.13000-010 |