
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hearthstone pull 128mm center to center describes a Berenson Corporation cabinet handle from the Hearthstone collection that uses a 5-1/16 inch center to center mounting layout, so it suits layouts planned around that standard drilling distance. This pull uses zinc construction, which creates a solid, consistent base material for cabinet and furniture applications. The brushed nickel finish on the zinc body provides a muted metallic look, useful where a softer sheen is preferred over high-gloss metal. With a listed length of 6-1/16 inches, this handle spans a bit beyond the mounting holes, giving finger clearance outside the screw line for a comfortable grip. The 1-7/16 inch projection sets how far the handle stands off the door or drawer front, which affects how easily fingers wrap behind the pull in daily use. A 1/2 inch width defines the front face size, shaping how the pull feels in the hand.
This Berenson Hearthstone series pull uses a 5-1/16 inch center to center, also described as 128 mm, which establishes the exact hole spacing needed on doors and drawers. That fixed dimension allows layouts to be templated and repeated from cabinet to cabinet. The listed screw size of 8-32 x 1 inch defines the thread and length relationship between the pull and typical cabinet front thicknesses, which supports straightforward alignment when tightening from the back. With a width of 1/2 inch, the pull does not occupy excessive face width, helping it fit narrow drawer fronts while still presenting a defined gripping edge. The total length of 6-1/16 inches sets how far the pull extends toward the panel edges or neighboring hardware, which matters when planning symmetry on multi-drawer stacks.
The Hearthstone zinc cabinet pull is part of the Berenson Hearthstone collection, which positions it as decorative hardware for cabinet and furniture fronts that use pulls instead of knobs. Its 5-1/16 inch center to center dimension fits doors or drawers drilled on the 128 mm standard, so it integrates into layouts that follow this common hole spacing. The brushed nickel finish coordinates with other brushed nickel components, which helps in kitchens, baths, or built-ins where visible hardware needs a uniform appearance. Because the pull length is 6-1/16 inches, it spans enough area on wider drawers to be visually balanced while still suitable on standard upper cabinet doors. The 1-7/16 inch projection provides space between the hardware and the front surface, which supports a more comfortable hand clearance for frequent opening and closing cycles.
The specified 5-1/16 inch center to center value lets installers use jigs or templates based around that measurement, which can keep hole placement consistent across a full run of cabinetry. The 128 mm reference in the description confirms the metric equivalent, which matters when switching between imperial and metric layout tools on the same job. The 8-32 x 1 inch screw size identifies both thread and nominal length, which aligns the pull with standard cabinet drilling setups that expect that screw specification. The 1/2 inch width of the pull front influences how it seats visually against narrow rails or stiles, helping plan reveals so the hardware does not overpower slim face frame members. With the pull length at 6-1/16 inches and projection at 1-7/16 inches, installers can anticipate how far the piece will extend into door overlays or drawer clearances, reducing surprises when aligning multiple fronts along a row.
This Hearthstone pull has a 5-1/16 inch, or 128 mm, center to center dimension, which defines the exact spacing between mounting holes on the cabinet front.
The Berenson Hearthstone cabinet pull has a listed overall length of 6-1/16 inches, so it spans slightly beyond the 5-1/16 inch mounting distance for added grip area.
This Hearthstone pull uses zinc as the base material with a brushed nickel finish, combining a metal core with a soft metallic sheen suited to brushed nickel design schemes.
The 2040-1BPN-P pull has a projection of 1-7/16 inches, defining how far it stands off the surface and affecting finger clearance behind the handle.
The Hearthstone brushed nickel pull has a width of 1/2 inch, which shapes the front profile and how it sits visually on narrow or standard cabinet rails.
The Berenson Hearthstone pull is specified with an 8-32 x 1 inch screw size, indicating the thread and nominal length used to fasten it through typical cabinet fronts.
This Berenson Hearthstone series 2040-1BPN-P pull combines a 5-1/16 inch center to center layout, 6-1/16 inch length, and 1-7/16 inch projection with a brushed nickel finish on zinc, which supports coordinated cabinet runs where consistent hole spacing, hand clearance, and finish match are priorities.
Sold In: 1 Each