Berenson Hearthstone Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 2045-1BPN-P
Description
Berenson Hearthstone Cabinet Pull 160mm For Cabinets
Berenson Hearthstone cabinet pull 160mm center to center gives a consistent 6-5/16 inch drilling layout, which helps align multiple doors and drawers on a run. The pull body is zinc, providing a sturdy metal grip point for everyday cabinet use. Its brushed nickel finish presents a muted metallic surface that works well where a softer look than polished metal is preferred. Overall length of 7-5/16 inches provides hand clearance across wider drawer fronts. A projection of 1-1/2 inches stands the pull off the face enough for fingers to wrap behind it comfortably on typical cabinet doors. The 9/16 inch width creates a slim front profile that sits cleanly on narrow rails and small drawer fronts without crowding the panel. This pull belongs to the Hearthstone collection, keeping style uniform across multiple openings when the same series is used.
Hearthstone Brushed Nickel Pull Job-Site Details
- The 6-5/16 inch (160 mm) center to center dimension sets fixed hole spacing, which streamlines drilling layouts for new cabinets and simplifies sizing when replacing existing pulls with the same spread.
- An overall length of 7-5/16 inches lets the pull span more of the drawer or door face, which provides a broader grab area that feels secure when opening heavier drawers or tall pantry doors.
- The 1-1/2 inch projection creates stand-off from the cabinet front, giving room for fingers behind the pull so doors and drawers can be operated comfortably, even for larger hands or thicker door profiles.
- A 9/16 inch width keeps the pull visually light and compact, which fits narrow face frames or small drawer fronts while still leaving enough bearing surface against the wood for stable attachment.
- The zinc material forms a solid metal body under the finish, supporting repeated pulling forces in typical cabinet use while allowing a detailed Hearthstone collection design.
- The brushed nickel finish lays down a soft, directional sheen, which helps cabinets read consistent under varied lighting while coordinating with other brushed nickel decorative hardware.
Center To Center And Projection For Straight Installs
The 160 mm (6-5/16 inch) center to center dimension sets the distance between mounting points, so jigs or templates can be set once and used across all doors and drawers in a project. With a 1-1/2 inch projection, the pull sits off the surface enough that fingers can grip from below or the side without rubbing the door face. The overall length of 7-5/16 inches positions the mounting points inboard of the ends, spreading load forces along the pull for everyday cabinet operation. A 9/16 inch width keeps the footprint modest, so the pull fits on rail sections where taller or deeper hardware might interfere with edge profiles or adjacent fronts.
Using This Hearthstone Pull On Cabinet Runs
Where The Hearthstone 160mm Pull Fits Best
The 6-5/16 inch center to center layout suits cabinets drilled on 160 mm spacing, allowing this Hearthstone pull to drop into runs designed for that metric standard. Its 7-5/16 inch overall length works well across medium and wide fronts, giving enough bar length for a solid hand grip. With a 9/16 inch width, the pull sits comfortably on door rails and drawer headers without dominating narrower faces, which is useful on kitchens that mix full-size drawers and smaller top drawers. The brushed nickel finish coordinates with other brushed nickel decorative hardware in the same area, maintaining a unified appearance across multiple cabinet banks.
Details That Support Consistent Cabinet Results
The 160 mm center to center measurement allows installers to use the same drilling pattern throughout a job, which reduces layout time and helps keep handle heights and offsets consistent. Its 1-1/2 inch projection provides clearance so fingers do not press against the cabinet surface during use, which can reduce finish wear around high-traffic doors. The zinc construction supplies a solid core for the Hearthstone design, supporting repeated pulls on heavier drawers or frequently used doors. Because the pull belongs to the Hearthstone collection, using the same part on all fronts keeps style and geometry uniform, helping reveal straight lines when viewing long cabinet runs. The 7-5/16 inch overall length and 9/16 inch width together define a balanced proportion, which helps doors close without interference while still giving enough bar area for a firm grasp.
Common Questions About The Hearthstone 160mm Pull
What are the key dimensions of this Hearthstone pull?
The pull has a 6-5/16 inch (160 mm) center to center, 7-5/16 inch overall length, 1-1/2 inch projection, and 9/16 inch width, which together define its drilling layout and how far it stands off the cabinet.
What material is the Berenson 2045-1BPN-P pull made from?
The Berenson 2045-1BPN-P pull is made from zinc, giving it a solid metal body that supports the Hearthstone design and typical cabinet pulling forces in kitchens or similar spaces.
How does the brushed nickel finish affect the look on cabinets?
The brushed nickel finish provides a soft, directional sheen rather than a mirror shine, which helps the pull blend with other brushed nickel decorative hardware across a room.
Why does the 160mm center to center measurement matter?
The 160 mm center to center setting fixes the hole spacing, so cabinet drilling jigs and templates can repeat the same pattern across all doors and drawers in a project.
How does the 1-1/2 inch projection help in daily use?
The 1-1/2 inch projection sets the pull off the surface, creating finger clearance behind the bar so doors and drawers can be gripped and opened comfortably.
What role does the 9/16 inch width play in fit?
The 9/16 inch width keeps the pull slim on the face, allowing installation on narrow rails or smaller drawer fronts without crowding edges or nearby fronts.
Selecting This Hearthstone Pull For Your Project
The Berenson Hearthstone Series 6-5/16 inch (160 mm) center to center brushed nickel pull brings a defined 160 mm drilling layout, zinc construction, and brushed nickel finish to cabinet runs. Its 7-5/16 inch length, 1-1/2 inch projection, and 9/16 inch width set a clear footprint, which supports consistent installation and everyday handling on doors and drawers where this style and spacing match the project design.