Berenson Hillcrest Series 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, - 2049-1BPN-P
Description
Berenson Hillcrest 96mm Pull For Cabinet Projects
Berenson Hillcrest 96mm pull is a zinc cabinet pull from the Camber collection in a brushed nickel finish, so it delivers a consistent look that matches other Camber pieces across a run of cabinets. The 3-3/4 inch (96 mm) center to center dimension sets precise hole spacing, which helps align multiple doors and drawers in a straight line. A total length of 5-3/8 inch gives the pull enough span for a solid hand grip, supporting frequent use on busy cabinet banks. The 1-1/2 inch projection sets the pull off the front of the door or drawer face, creating finger clearance that helps users open fronts without rubbing against the surface. A 9/16 inch width keeps the pull visually light, which fits applications where the hardware should stay subtle on the face of the cabinet.
Key Hillcrest Brushed Nickel Pull Details
- The 3-3/4 inch (96 mm) center to center sizing matches standard cabinet drilling patterns, which helps installers line up new pulls with existing or template-based holes on doors and drawers.
- The 5-3/8 inch overall length provides extended grip area, giving users more contact surface when opening wider or heavier fronts in kitchen, bath, or shop cabinetry.
- The 1-1/2 inch projection holds the pull out from the cabinet face, creating space for fingers to wrap behind the bar and helping reduce contact with finished door and drawer surfaces.
- The 9/16 inch width keeps the pull profile narrow, which supports a cleaner visual line on face frames or slab fronts while still offering a defined edge to pull against.
- The zinc material construction provides a solid base for the brushed nickel finish, which helps maintain a consistent surface appearance across multiple pulls on the same installation.
Mounting Dimensions For Accurate Hole Alignment
The center to center measurement of 3-3/4 inch (96 mm) defines the mounting points, giving installers an exact distance for drilling or reusing cabinet holes. With a total pull length of 5-3/8 inch, the ends extend beyond the mounting points, which helps visually center the pull on typical drawer fronts. The 1-1/2 inch projection controls how far the pull stands off the door or drawer, which influences hand clearance and keeps the pull from feeling too tight to grasp. At 9/16 inch wide, the pull maintains a slim footprint, which helps when setting consistent reveals between multiple pulls on tight layouts.
Using This Camber Collection Pull In Projects
Where This Berenson Hillcrest 96mm Pull Fits
This Berenson Hillcrest 96mm pull from the Camber collection fits cabinet applications that use 3-3/4 inch (96 mm) center to center spacing, so it suits many kitchen and bath layouts relying on that standard drilling. The brushed nickel finish supports use in projects where a muted metallic look is preferred, helping hardware blend with brushed fixtures and hinges. With its 5-3/8 inch overall length, the pull works on both doors and medium-width drawers, keeping the grip centered while covering the hole spread. The 1-1/2 inch projection suits fronts where users need enough reach to grab the pull from different angles along a run of cabinets.
Details That Support Consistent Cabinet Results
The fixed 3-3/4 inch (96 mm) center to center dimension allows installers to repeat the same drilling pattern across multiple cabinets, supporting faster layout with jigs or templates. A 9/16 inch width keeps the pull edge defined but not bulky, which helps maintain even visual spacing between neighboring pulls on tight drawer stacks. Zinc construction paired with the brushed nickel finish means each pull in the 2049-1BPN-P part number family shares the same visual specification, which supports uniform appearance on large jobs. The 1-1/2 inch projection also keeps the working grip distance consistent from cabinet to cabinet, helping users experience the same hand feel across the entire installation.
Common Questions About This Berenson Hillcrest Pull
What center to center size is this Hillcrest pull?
The Berenson Hillcrest 96mm pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the exact distance between mounting holes for cabinet doors and drawers.
What are the overall dimensions of the 2049-1BPN-P pull?
The 2049-1BPN-P pull measures 5-3/8 inch in total length, with a 1-1/2 inch projection and a 9/16 inch width, which defines its reach, grip depth, and front profile.
What material and finish does this Berenson pull use?
The Berenson Hillcrest pull is made from zinc with a brushed nickel finish, which provides a consistent metallic surface appearance matching other brushed nickel decorative hardware.
Which collection does this brushed nickel pull belong to?
This brushed nickel pull is part of the Camber collection, so it shares styling and finish details with other Camber decorative hardware pieces.
How does the projection affect cabinet use on this pull?
The 1-1/2 inch projection spaces the pull off the cabinet face, giving fingers room behind the bar and helping reduce hand contact with finished surfaces during use.
What brand and part number identify this cabinet pull?
This cabinet pull is from Berenson Corporation and uses manufacturer part number 2049-1BPN-P, which ties to the Hillcrest zinc pull in a brushed nickel finish.
Selecting This Pull For Matching Cabinet Runs
The Berenson Hillcrest 96mm pull combines a 3-3/4 inch center to center pattern, 5-3/8 inch length, and 1-1/2 inch projection, so it fits cabinet layouts built around that spacing and grip depth. The brushed nickel finish on a zinc body ties into the Camber collection, which supports visually coordinated banks of doors and drawers. For projects where consistent hole spacing, repeatable hand clearance, and a unified brushed nickel look matter, this 2049-1BPN-P pull from Wurth Baer Supply aligns with those cabinet hardware requirements.