Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Hillcrest pull 96mm describes this cabinet handle from the Hillcrest Series with a 3-3/4 inch (96 mm) center to center drilling, so it lines up with standard 96 mm boring patterns on cabinet doors and drawers. The pull is part of the Berenson Hillcrest Series, giving you a defined style family when matching hardware across a project. Its Verona Bronze finish provides a specific dark bronze look, so you can coordinate it with other Verona Bronze components in the same space. The pull is made from zinc, which gives a solid metal body that withstands normal cabinet use in kitchens, baths, or shop fixtures. A manufacturer part number of 2068-10VB-P identifies this exact Hillcrest pull, helping you repeat the same part on reorders and across multiple jobs without confusion.
This Berenson cabinet handle uses a 3-3/4 inch (96 mm) center to center hole spacing, so it works on fronts bored to that common drilling for replacement or new installation. With an overall length of 5-3/8 inches, the pull extends past the mounting holes on each side, which helps cover minor chipping at the bore edges on refacing jobs. The 1-1/2 inch projection from the door or drawer face provides room to wrap fingers behind the bar, important on thicker fronts or when users wear gloves. A 9/16 inch width at the grip means the pull presents a modest visual profile, fitting both standard cabinet doors and narrower drawer fronts without overwhelming the face.
This Hillcrest Series pull belongs to the Decorative Hardware & Moldings category under Handles and Pulls, so it is intended for use on cabinet doors and drawers rather than structural applications. The 3-3/4 inch (96 mm) center to center drilling is a widely used cabinet standard, which supports straightforward layout on new casework and direct change-out on many existing fronts drilled to 96 mm. Its Verona Bronze finish ties this pull into designs that call for a bronze tone, letting installers carry the same finish across kitchens, baths, or built-ins that use Verona Bronze hardware elsewhere. With an overall length of 5-3/8 inches, the pull spans a useful portion of typical cabinet stiles and drawer rails, giving end users a defined grab point even on wider fronts. The Hillcrest naming and Berenson brand association help designers and installers specify this pull consistently across drawings, bids, and purchase lists.
The 96 mm center to center dimension gives a fixed drilling pattern, so jigs and CNC programs can repeat this layout across multiple doors and drawers without adjustment between parts. A 1-1/2 inch projection from the face offers predictable clearance behind the pull, which helps maintain consistent ergonomics from cabinet to cabinet on a run. The 9/16 inch width of the grip affects how the pull feels when grasped, providing a defined edge and thickness that users can hook with fingers for controlled opening. The zinc construction means each handle has a metal body, helping pulls on frequently used fronts behave consistently over time in typical cabinet environments. The 2068-10VB-P manufacturer part number and HILLCREST PULL 96MM CC VERONA BRZ SAP description clearly mark this exact configuration, allowing shops and installers to reorder the same pull and keep hardware uniform across additions, replacements, or phased projects. The specified screw size of 8-32 x 1 inch indicates the thread and nominal length intended for mounting through standard cabinet doors and drawer fronts, which supports predictable grip of the pull against the face material.
The Berenson Hillcrest pull 96mm has a 3-3/4 inch (96 mm) center to center dimension, so mounting holes are spaced for standard 96 mm cabinet drilling patterns.
The Hillcrest pull has a 5-3/8 inch overall length, giving a wider grab area across the front of the cabinet door or drawer.
The Verona Bronze pull projects 1-1/2 inches from the cabinet surface, creating finger clearance behind the handle while keeping it close to the face.
The 2068-10VB-P Hillcrest pull is made from zinc, providing a metal body suitable for everyday cabinet door and drawer operation.
This Hillcrest Series pull uses a Verona Bronze finish, so it aligns with other Verona Bronze decorative hardware in the same project.
The pull specifies 8-32 x 1 inch screws, matching common cabinet door and drawer thicknesses for through-bolt handle installation.
The Berenson Hillcrest pull 96mm combines a 3-3/4 inch (96 mm) center to center layout, 5-3/8 inch overall length, and 1-1/2 inch projection in a Verona Bronze, zinc construction handle for cabinet use. Those defined dimensions and the 2068-10VB-P part number allow you to call out this exact pull across drawings, ordering, and installation. Put it into your next cabinet run where a Verona Bronze finish and a 96 mm drilling pattern match the project requirements.
Sold In: 1 Each
