Berenson Hillcrest Series 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, - 2071-1BPN-P
Description
Berenson Hillcrest Series Pull For Cabinets
Berenson Hillcrest Series pull is a zinc cabinet handle in the Camber collection with a brushed nickel finish, giving cabinet doors and drawers a consistent look that matches other Camber pieces on the job. The pull has a center to center measurement of 6-5/16 inches (160 mm), so it spans wider drawer fronts or tall doors with a balanced grip area that suits both residential and commercial cabinetry layouts. Its overall length of 7-7/8 inches provides a longer visual line across the face, which helps align multiple fronts in banks of drawers. A projection of 1-1/8 inches sets the handle off the surface, leaving finger clearance for easy grasping when hands are wet or gloved. The 5/8 inch width creates a slim profile that reads clean on face frames or slab fronts while still feeling solid in hand during everyday use.
Functional Details That Support Daily Cabinet Use
- The zinc material gives the pull a sturdy feel in hand, which helps doors and drawers open consistently under repeat use in kitchens, baths, or shop cabinetry where hardware is handled frequently.
- The brushed nickel finish softens reflected light on the pull, which helps fingerprints and light wear mark less visibly across multiple fronts, supporting a uniform appearance over time.
- The 6-5/16 inch (160 mm) center to center sizing sets mounting holes on a common spread, which simplifies layout on new cabinets using metric or imperial planning and helps align with other 160 mm pulls in the space.
- The 7-7/8 inch overall length gives extra bar beyond the mounting points, which visually anchors the pull on wider fronts and makes it easier to grab from different angles.
- The 1-1/8 inch projection creates working space between the pull and the door face, which improves grip comfort and reduces knuckle contact with the cabinet surface during opening.
- The 5/8 inch width keeps the pull visually light on narrower rails and stiles, which helps hardware proportions stay in scale on smaller cabinet faces and narrow drawer fronts.
Handle Sizing And Hole Spread For Installation
The Hillcrest 160 mm center to center pull uses a 6-5/16 inch hole spread, giving installers a clear drilling dimension for jigs or CNC programs when laying out cabinet fronts. Its 7-7/8 inch overall length leaves material beyond each mounting point, which helps cover minor placement variation while maintaining an even reveal on the face. With a 1-1/8 inch projection, the pull stands off the cabinet just enough to clear typical door edge profiles, making it comfortable to grab without crowding adjacent hardware. The 5/8 inch width fits easily on standard rails or drawer headers, so the handle can be positioned without conflicting with panel details or edge profiles on many common cabinet designs.
Cabinet Applications And Pull Selection Considerations
Where This 160 Mm Pull Works Best
The Hillcrest 160 mm center to center pull fits cabinetry layouts that call for a longer handle, such as wide kitchen drawers or tall pantry doors where more hand contact improves control. Its overall 7-7/8 inch length stretches across the face, which suits full-overlay fronts and helps visually tie together multi-drawer stacks. The brushed nickel finish pairs well with many hinge finishes and appliances using similar tones, keeping the hardware run visually consistent across a room. Because the pull belongs to the Camber collection, it integrates into projects that already use Camber pieces, letting hardware on doors and drawers share the same design language. The zinc construction supports everyday cabinet use, so the same pull can be specified across kitchens, vanities, or utility cabinets that see regular opening and closing.
Why These Dimensions Matter For Repeatable Results
The defined 6-5/16 inch (160 mm) center to center dimension gives a precise reference for drilling, which helps installers repeat hole locations across multiple fronts without re-measuring each time. That fixed spread also coordinates with standard drilling jigs, speeding up runs of doors and drawers. The 1-1/8 inch projection and 5/8 inch width set clear expectations for how far the pull will extend into the working space, which is important when mapping hardware near adjacent walls, appliances, or other doors. Knowing the 7-7/8 inch total length in advance lets layout planning account for clearances when several pulls are placed close together on narrow faces. The brushed nickel finish on zinc means the visual tone remains consistent from pull to pull, which matters when aligning hardware across long cabinet runs where small mismatches would stand out.
Common Questions About This Hillcrest Cabinet Pull
What are the key dimensions of this Berenson Hillcrest pull?
The Berenson Hillcrest Series pull has a 6-5/16 inch (160 mm) center to center, 7-7/8 inch overall length, 1-1/8 inch projection, and 5/8 inch width, guiding drilling layout and visual proportion on cabinet fronts.
What material and finish does the 2071-1BPN-P pull use?
The 2071-1BPN-P pull is made from zinc with a brushed nickel finish, giving a solid metal feel in hand and a soft metallic appearance that coordinates with many cabinet and appliance finishes.
How does the 160 mm center to center help installation?
The 160 mm center to center dimension sets a standard hole spread, which works well with common drilling jigs and layouts, helping installers repeat hole locations accurately across multiple cabinet fronts.
Is this Camber collection pull suitable for wider drawers?
This Camber collection pull has a 7-7/8 inch overall length and 6-5/16 inch center to center, giving a longer grip area that suits wider drawers or larger doors needing more hand contact.
How does the 1-1/8 inch projection affect everyday use?
The 1-1/8 inch projection holds the pull away from the cabinet face, creating comfortable finger clearance so doors and drawers can be grasped and opened without knuckles rubbing the surface.
What identifies this brushed nickel pull for reorders?
This brushed nickel pull is identified by Berenson Corporation as part number 2071-1BPN-P and described as Hillcrest pull 160 mm center to center brushed nickel, helping match existing installations.
Selecting This Hillcrest Pull For Your Project
The Hillcrest 160 mm center to center brushed nickel pull from Berenson Corporation combines zinc construction, Camber collection styling, and defined dimensions to support planned cabinet layouts. With its 7-7/8 inch length, 1-1/8 inch projection, and 5/8 inch width, it offers a comfortable handhold and a clean look across doors and drawers. For projects needing a consistent brushed nickel appearance and a standard 160 mm drilling pattern, this Berenson Hillcrest Series pull gives clear sizing and finish details that align with measured, repeatable cabinet work.