Berenson Hillcrest Series 6-5/16" (160 mm) Center to Center Verona Bronze Pull, - 2072-10VB-P
Description
Berenson Hillcrest Pull 160mm Center To Center Use
Berenson Hillcrest pull 160mm center to center gives cabinets a defined gripping point, using a 6-5/16 inch center-to-center spread that suits common door and drawer layouts, so hole drilling or replacement follows a clear, repeatable dimension. The pull comes from the Hillcrest Series, so the style and proportions match other Hillcrest pieces in a project, helping runs of cabinets read as one coordinated installation. Its Verona Bronze finish defines the visible surface tone, adding a dark metallic look that sets off wood or painted fronts in millwork builds. The pull is made from zinc, so the base material supports cast detail while keeping overall weight manageable on standard cabinet fronts. Overall length of 7-7/8 inches establishes how much rail presence the pull has on a face, which helps plan spacing between pulls on banks of drawers.
Key Hillcrest Verona Bronze Pull Details
- The 6-5/16 inch (160 mm) center to center dimension sets fixed mounting points, which simplifies layout for new drilling or direct replacement where existing holes match this spread.
- A 7-7/8 inch overall length defines how much of the drawer or door rail the pull covers, which matters when balancing visual weight on narrow or wide fronts in a run.
- The 1-1/8 inch projection establishes how far the pull stands off the cabinet face, giving fingers space behind the handle while keeping the profile tight to the door plane.
- A 5/8 inch width sets the gripping surface size across the hand, which influences how the pull feels when opening heavier drawers or tall pantry doors.
- The Verona Bronze finish specifies the surface color and sheen, helping this pull coordinate with other Verona Bronze decorative hardware in the same space for a consistent look.
Cabinet Pull Mounting Dimensions And Fit
This Hillcrest Series pull uses a 6-5/16 inch center to center measurement, so installers can lay out mounting holes on that fixed spacing for consistent alignment across cabinet doors and drawers. The 1-1/8 inch projection defines clearance from the cabinet face, which affects hand access when reaching from above or the side on tall cabinets. A 5/8 inch width describes the rail thickness across the hand, contributing to how securely fingers wrap around the pull during repeated everyday use. Overall length of 7-7/8 inches provides the full tip-to-tip dimension, which helps plan placement in relation to door edges, panel profiles, and neighboring pulls on multi-drawer stacks.
Using This Hillcrest Series Verona Bronze Pull
Where This Verona Bronze Zinc Pull Fits Best
This pull belongs to the Berenson Hillcrest Series, so its proportions and style are designed to coordinate with other Hillcrest handles in cabinet installations. The 6-5/16 inch (160 mm) center to center sizing suits medium to larger cabinet doors and wide drawers where a longer grip point helps balance the front. Its Verona Bronze finish ties directly to projects using Verona Bronze decorative hardware, allowing this pull to visually match other handles and pulls called out with the same finish. The 7-7/8 inch overall length gives this piece enough span to look properly scaled on standard kitchen base cabinets, vanities, or utility storage doors that benefit from a longer linear pull.
Details That Support Consistent Cabinet Results
The 6-5/16 inch center to center dimension provides a precise drilling reference, which supports repeatable hole placement when laying out a full cabinet run using the same pull model. A 1-1/8 inch projection fixes the stand-off distance from the door or drawer surface, giving predictable finger clearance that stays the same from one cabinet to the next. The 5/8 inch width sets the bar thickness down the length of the pull, so the gripping feel remains consistent for users moving between different doors and drawers. The pull is made from zinc, which supports a solid cast form around the mounting area that helps it interface cleanly with the cabinet face. Its Verona Bronze finish records the exact surface appearance, so matching this pull by specification is straightforward when expanding a project or replacing hardware later. The manufacturer part number 2072-10VB-P precisely identifies this configuration, helping specifiers call out the same pull in drawings, orders, and field work without confusion.
Common Questions About This Hillcrest Cabinet Pull
What are the center to center dimensions for this pull?
The Berenson Hillcrest Series pull has a 6-5/16 inch, or 160 mm, center to center dimension, which sets the spacing between mounting holes for layout and replacement work.
How long is the Berenson Hillcrest Verona Bronze pull overall?
The pull has a 7-7/8 inch overall length, so installers can gauge how much of the cabinet rail it will cover and plan spacing on drawer banks or wide doors.
What material and finish does this cabinet pull use?
This Hillcrest Series pull is made from zinc with a Verona Bronze finish, giving it a cast metal body and a dark bronze surface that matches other Verona Bronze hardware.
What is the projection of the 2072-10VB-P pull from the cabinet face?
The Berenson 2072-10VB-P pull projects 1-1/8 inches from the cabinet surface, providing a defined stand-off distance that affects finger clearance and profile.
How wide is the grip area on this Hillcrest Series pull?
The pull has a 5/8 inch width, which sets the gripping thickness across the hand and influences how it feels when opening heavier drawers or doors.
What manufacturer number identifies this Verona Bronze pull?
This pull is identified by manufacturer part number 2072-10VB-P, which uniquely specifies the Hillcrest Series, Verona Bronze finish, and 160 mm center to center size.
Selecting This Hillcrest Pull For Your Project
The Berenson Hillcrest Series 6-5/16 inch (160 mm) center to center pull in Verona Bronze provides defined dimensions for layout, including a 7-7/8 inch length, 1-1/8 inch projection, and 5/8 inch width, helping projects at Wurth Baer Supply align hardware selection to planned cabinet fronts.