Berenson Hillcrest Series Verona Bronze 10-1/16" (256 mm) Center to Center Appliance Pull, -2074-10VB-P

Berenson Hillcrest Appliance Pull For Appliances

Berenson Hillcrest appliance pull gives you a Verona Bronze handle sized for appliance doors with a 10-1/16 inch (256 mm) center to center. This layout spaces the mounting points for wide panels, which supports stable operation on larger doors. The pull is part of the Camber collection, so its styling ties into that family for projects using matching decorative hardware. The handle is made from zinc, which provides a solid metal base for everyday appliance use in busy spaces. A 12 inch overall length gives you room for a full hand grip, which helps when opening heavier appliance doors. The projection of 1-7/16 inch sets the pull out from the surface, leaving clearance behind the handhold during use. A width of 13/16 inch creates a comfortable front face, so fingers can pull without sharp edges digging into the hand.

Key Hillcrest Pull Details That Help On The Job

• The 10-1/16 inch (256 mm) center to center dimension positions the two fastener points with a long span, which works well on taller or wider appliance fronts where a short pull would look undersized or concentrate stress.
• The 12 inch length keeps the grip extending past the mounting holes at both ends, which provides more leverage when operating heavier doors and allows consistent alignment with surrounding tall handles.
• The 1-7/16 inch projection pushes the handle away from the surface, which leaves space for fingers behind the pull and helps hands clear adjacent trim or cabinet faces during repeated use.
• The 13/16 inch width gives the front of the pull a broad contact area, which spreads load across the hand and provides a more secure feel when pulling against strong appliance seals.
• The Verona Bronze finish defines the visible surface of the pull, which lets it coordinate with other Verona Bronze hardware elements across a kitchen or similar install for a unified appearance.
• The zinc material forms the body of the appliance pull, which offers a metal structure suited to regular gripping and pulling cycles in residential or light commercial cabinetry.

Mounting Dimensions For Hillcrest Appliance Pull

The 10-1/16 inch (256 mm) center to center measurement establishes the hole layout for this Hillcrest appliance pull, which guides drilling or reuse of existing holes on appliance panels. The total 12 inch length then frames those holes with some extension past each side, which can help align this pull with other tall handles nearby. With a projection of 1-7/16 inch, the pull stands off the surface enough to clear fingers behind the bar, which supports comfortable access even on thicker appliance fronts. The 13/16 inch width sets the visible face size of the handle, which influences both the look on wide panels and the amount of contact area available for gripping.

Using This Verona Bronze Appliance Pull Effectively

Where The Camber Collection Pull Fits Best

This Hillcrest series Verona Bronze appliance pull, part of the Camber collection, fits projects that call for a unified decorative hardware style across doors and appliance fronts. The 10-1/16 inch (256 mm) center to center size suits appliance facings where a longer pull matches the scale of the door, which keeps the hardware visually balanced on tall or wide fronts. The 12 inch overall length works on large surfaces where shorter cabinet pulls might look out of proportion, which helps maintain consistent lines across refrigerator, freezer, or panel-ready fronts in the same run. With a projection of 1-7/16 inch, the handle holds the grip area away from the door, which can be useful when hands need space around nearby trim, panels, or countertops. The Verona Bronze finish supports designs that use warm-toned decorative hardware, which lets this pull visually coordinate with other Verona Bronze pieces specified for the job.

Dimensions That Support Consistent Appliance Results

The defined 10-1/16 inch center to center drilling dimension on this Berenson zinc cabinet pull lets layouts be repeated from one appliance front to the next, which supports consistent spacing and simplifies template use. The 12 inch length keeps each end of the pull extending past the mounting points, which can visually align with adjacent tall door hardware for a steady horizontal reference line. A width of 13/16 inch gives an ample front surface for fingers to press against when pulling, which can reduce hand strain over repeated openings on tight-sealed appliances. The 1-7/16 inch projection sets a specific standoff distance from the face, which provides enough clearance for gripping even when the appliance door edge sits close to neighboring cabinetry. The zinc construction provides a uniform metal body, which supports stable threading engagement with the specified screw size during installation.

Common Questions About This Hillcrest Appliance Pull

Select This Pull For Sized Appliance Fronts

The Berenson Hillcrest appliance pull with 10-1/16 inch (256 mm) center to center and 12 inch length offers defined dimensions for appliance doors where longer hardware is required. With zinc construction and a Verona Bronze finish from the Camber collection, it aligns visual style and functional reach across larger panels. For projects needing a consistent drilling pattern, projection, and hand grip across multiple appliance fronts, this Verona Bronze appliance pull provides a clearly specified option ready to match that layout.