Berenson Village Series Verona Bronze 10-1/16" (256 mm) Center to Center Appliance Pull, -2084-10VB-P
Description
Berenson Village Appliance Pull For Large Fronts
Berenson Village Series appliance pull gives you a 10-1/16 inch center to center grip for aligning with larger appliance and cabinet fronts. The pull is part of the Villa collection, so it ties into other pieces from the same design family for consistent hardware layouts. It is made from zinc, which provides a solid feel while allowing precise casting of the profile for clean lines against the door surface. The Verona Bronze finish adds a dark, warm tone that works with traditional and transitional cabinet colors, helping the pull visually anchor taller doors. With an overall length of 12-3/16 inches, the handle spans more of the panel, so forces are spread across a wider area when the door or panel is opened. A projection of 1-5/16 inches leaves space behind the pull for fingers, which supports a comfortable grip on thicker appliance panels.
Key Details That Support Daily Use
- The 10-1/16 inch center to center dimension sets consistent hole spacing, which matters when aligning multiple doors or appliance panels in a run.
- The 12-3/16 inch overall length increases leverage, so heavier doors and panels can be pulled open with less effort along the full handle.
- The 1-5/16 inch projection creates working finger clearance, helping hands stay clear of the door face and surrounding trim during operation.
- The 15/16 inch width gives a firm surface to grab, which helps when pulling on tall or heavy panels where control is important.
- The Verona Bronze finish provides a dark, muted tone that can visually pair with similar bronze hardware for a coordinated installation.
- The zinc material allows a shaped profile with smooth edges, which supports comfortable handling during frequent daily use.
Installation Dimensions For Appliance Alignment
The 10-1/16 inch center to center mounting dimension defines the exact hole spacing needed when drilling through cabinet or appliance panels, supporting straight, repeatable layouts across multiple fronts. With an overall length of 12-3/16 inches, the pull will extend beyond the mounting points in a balanced way, which helps lay out clearances to neighboring doors, walls, or trim. A projection of 1-5/16 inches sets the stand-off from the surface, so installers can account for door thickness and nearby handles when planning clearances. The 15/16 inch width defines how much face area the pull will cover on the panel, aiding in choosing rail and stile sizes that visually suit this hardware.
Using This Verona Bronze Appliance Pull
Where This Villa Collection Pull Fits Best
This Villa collection appliance pull is suited to applications that match its 10-1/16 inch center to center hole spacing, which is common on wider cabinet and appliance fronts. The Verona Bronze finish lets it coordinate with other bronze-toned decorative hardware, so it can be used across both appliance panels and adjacent tall pantry doors for a unified look. Its overall length of 12-3/16 inches makes it practical for full-height doors or large drawer fronts where a small handle would feel undersized, giving users a longer gripping surface along the panel. The 15/16 inch width provides a substantial visual presence without covering too much of the door face, which can be useful when working with detailed wood grains or panel profiles.
Details That Support Accurate, Repeatable Results
The 10-1/16 inch center to center measurement allows installers to base drilling jigs or templates on a fixed dimension, which supports consistent placement across a bank of doors or panels. Because the pull projects 1-5/16 inches from the surface, it leaves defined clearance for fingers and for door swing near adjacent cabinetry, easing planning around tight reveals. The 12-3/16 inch overall length helps distribute the pulling force over a larger area of the panel, which can be beneficial on heavy appliance doors that see frequent use. Constructed from zinc, the pull can be cast with controlled tolerances, supporting accurate alignment between the mounting posts and the drilled holes, which reduces rework during installation.
Common Questions About Size, Finish, And Fit
What center to center size is this Berenson appliance pull?
The appliance pull has a 10-1/16 inch center to center dimension, so mounting holes are spaced to match that distance for alignment on wide doors and panels.
What is the overall length of the Berenson 2084-10VB-P pull?
The pull length is 12-3/16 inches, giving extended grip area that suits tall cabinet doors and appliance fronts needing a longer handle.
How far does this Verona Bronze appliance pull project?
The appliance pull projects 1-5/16 inches from the mounting surface, creating space behind the handle for fingers when operating heavier panels.
What material is the Villa collection Village Series pull made from?
The pull is made from zinc, which allows a shaped profile with smooth edges for comfortable contact during frequent opening and closing.
What finish does this Berenson Village Series appliance pull have?
The appliance pull has a Verona Bronze finish, giving a dark, warm appearance that coordinates with similar bronze decorative hardware.
Which collection is this Verona Bronze zinc appliance pull part of?
This appliance pull is part of the Villa collection and the Village Series, helping hardware stay visually consistent across a project.
Select This Pull For Matching Appliance Fronts
The Berenson Village Series appliance pull with 10-1/16 inch center to center spacing, zinc construction, and Verona Bronze finish offers defined dimensions for layout and a coordinated look with the Villa collection. Use its 12-3/16 inch length, 1-5/16 inch projection, and 15/16 inch width to plan hole locations and clearances on appliance panels and large cabinet fronts where a longer handle in Verona Bronze is desired.